Fleming Steel Company - Aircraft Tail Hangar Doors, Sealing Aircraft Tail Dock Doors

DOWNLOADS
Aircraft Tail Hangar Doors

Category: overhead single-panel doors | single panel doors | single panel overhead doors...

MasterFormat: Specialty Doors and Frames | Special Function Doors | Hangar Doors...



Fleming Steel Company
P.O. Box 5207
New Castle, PA 16105
Tel: (800) 338-6964
Fax: (724) 658-7018

info@flemingdoors.com

http://www.flemingdoors.com

Find a rep/distributor

Request More Info

DOWNLOADS

Related Products

Overview


Aircraft Tail Hangar Doors

Model Number: Aircraft Tail Hangar Doors, Sealing Aircraft Tail Dock Doors

Aircraft tail doors are used in hangars when it is not economically feasible or practical to make the main doors full height. Normally, these doors are used when the facility is dedicated to one aircraft. vertical lift, rolling shutter (coiling) or jamb guide canopy are the normal choices for a tail door system. If the tail door slot width is small and less than forty percent of the main door (in the closed position) is being cantilevered into the tail opening then the natural choice is a rolling shutter (coiling) type door. However, if the tail slot width requires more than forty percent of the main door to cantilever into that area, a jamb guide canopy is used because it can structurally carry the top guides for the main doors.

Built originally for Pan American World Airways at Kennedy International Airport, this hangar features four bays; each 265'-0" wide and has 4 coupled Fleming slide doors controlled from cabs at each end of the train. Fleming canopy doors 80'-0" wide by 35'-0" high pass the high tails of B-747s. Vertical lift doors 21'-0" wide by 16'-0" high admit service vehicles.


See More


Sweets app for Revit – Learn More