Fabreeka International -PLM Isolators Rubber Air Springs

DOWNLOADS

PLM Isolators Rubber Air Springs

KEY FEATURES/BENEFITS

  • While pressurized, Fabreeka PLM elastomer air springs will isolate frequencies from as low as 5 Hz
  • When pressurized, PLMs will isolate frequencies above 14 Hz
  • The ratio of vertical to horizontal natural frequency is approximately 1:1 with high horizontal stability

Our Fabreeka® PLM air spring, or pneumatic isolation mounts, are low-frequency vibration and shoc...


Category: air springs | equipment levelers | machine levelers...

MasterFormat: Sound, Vibration, and Seismic Control | Manufactured Sound and Vibration Control Components



Fabreeka International
PO Box 210
1023 Turnpike Street
Stoughton, MA 02072
Tel: (800) 322-7352
Fax: (781) 341-3983

info@fabreeka.com

https://www.fabreeka.com/

Find a rep/distributor

Request More Info

DOWNLOADS

Related Products

Overview


PLM Isolators Rubber Air Springs

KEY FEATURES/BENEFITS

  • While pressurized, Fabreeka PLM elastomer air springs will isolate frequencies from as low as 5 Hz
  • When pressurized, PLMs will isolate frequencies above 14 Hz
  • The ratio of vertical to horizontal natural frequency is approximately 1:1 with high horizontal stability

Our Fabreeka® PLM air spring, or pneumatic isolation mounts, are low-frequency vibration and shock isolators to reduce unwanted vibration while leveling the devices they support.

When used as a vibration damper, the internal air chamber ensures significant isolating effects from as low as 5 Hz, as its natural frequency is only 3.0 Hz. PLM air spring elements also isolate while unpressurized. The vertical natural frequency of the elastomer body is around 10 Hz and will therefore isolate interfering frequencies above 14 Hz.

The ratio of vertical to horizontal natural frequency with Fabreeka’s elastomer air spring is approximately 1:1 with high horizontal stability. The elastomer wall design in PLM air springs ensures large dynamic spring travel for applications vulnerable to shock and impact. External spacers / stops are advisable to prevent air spring strikethrough where low natural frequency of 3 Hz is still required.

The Fabreeka PLM pneumatic elastomeric mounts include a vulcanized threaded inlet for inflating the air springs, using either a Schrader valve or pneumatic screw attachment. No special connections are needed. Air springs with pneumatic screw connectors can be connected to the respective controlled air supply which eases pressurization and leveling.


See More