Fabreeka-PTFE Bearing Pad
Fabreeka-PTFE bearing pad is comprised of the original fabric reinforced, elastomeric pad developed in 1936. Fabreeka-PTFE pad is used to accommodate construction irregularities such as rotation and non-parallel load bearing surfaces, while also providing a sliding surface to accommodate expansion. The Fabreeka-PTFE bearing pads are manufactured with a Teflon® surface for use in expansion bearings and pipe slides. Fabreeka pad is scientifically constructed to give years of service under the most severe operating conditions.
Fabreeka-PTFE pad can be used in structural expansion bearings, slide bearings, pipe clamps and as pipe support pads.KEY FEATURES/BENEFITS
- Pads can withstand compressive loads perpendicular to the plane of laminations of not less than 12,000 psi before breakdown.
- Pads meet AASHTO standard specification for fabric-reinforced bearing pads.
- Low coefficient of friction via PTFE surface.
Fabreeka bearing pad is manufactured of all new (unused) materials and composed of multiple layers of prestressed 50/50 cotton-polyester blend duck, 8.1 ounce per net square yard, duck warp count 50 ± 1 threads per inch and filling count 40 ± 2 threads per inch, impregnated and bound with a high quality, oil-impervious nitrile rubber compound, containing rot and mildew inhibitors and anti-oxidants, compounded into resilient pads of uniform thickness.
The Polytetrafluorethylene (PTFE) self-lubricating surface is a 100 percent virgin (unfilled) polymer bonded to a rigid confining substrate. The substrate limits the flow (elongation) of the confined PTFE to not more than 0.009″ under a load of 2,000 psi. A range of PTFE thicknesses can be supplied.
Fabreeka-PTFE pad is impervious to most oils and is resistant to the effects of steam, water, mildew and brine. The effective temperature range is -65 ° F to 200 ° F.
The durometer of the Fabreeka pad is 90±5 (Shore A).
Fabreeka-PTFE pad is manufactured in nominal thicknesses of: English
1/8″ - 3.2mm
1/4″ - 6.3mm
1/2″ - 12.7mm
5/8″ - 16.0mm
3/4″ - 19.0mm
1″ - 25.4mm
Other thicknesses are available by simply combining and bonding the above standard thicknesses. Thicknesses shown are nominal. Please contact Fabreeka International for manufacturing tolerance values.