FF Systems Inc. -1050 Series - Heavy-Duty Floor Access Covers

DOWNLOADS

The class-leading Howe Green 1050 Series Heavy-Duty Floor Access Covers are suitable for all use with thicker and hard-wearing floor finishes to enable permanent, safe access to services concealed underneath.


Category: HVAC access doors | duct access doors | duct access panels...

MasterFormat: Access Doors and Panels | Access Doors and Frames | Access Panels and Frames...



FF Systems Inc.
2840 Hunter Street
Fort Meyers, FL 33916
Tel: (888) 978-1808
Fax: (239) 288-4251

info@ffsystemsinc.com

https://www.ffsystems.com/

Find a rep/distributor

Request More Info

DOWNLOADS

Related Products

Overview


1050 Series - Heavy-Duty Floor Access Covers

The class-leading Howe Green 1050 Series Heavy-Duty Floor Access Covers are suitable for all use with thicker and hard-wearing floor finishes to enable permanent, safe access to services concealed underneath.

The 1050 Series is available in single, duct or multipart configurations for use in interior or exterior areas up to 6.5 tonne pneumatic tyrewheel load. Manufactured in the UK and fire rated to BS 476 - Part 22, all covers are made to your exact specification with no time or cost constraint.

Features / Benefits

Made to your specification between stated maximum and minimum sizes, with no time or cost constraint.

Quick and easy to install ensuring minimum disruption.

Provides easy access to underfloor services using lifting keys.

Any configuration of ducts and branches can be created to provide a tailor-made floor access solution.

Fire rated to BS 476 - Part 22 for stainless steel covers. Fire rated for 2 hours on integrity, and up to 2 hours on insulation depending on the floor access cover fill specification.

Double sealed option provides the highest levels of hygiene and security.

Typical Floor Finishes

All types of hard floor finish - ceramic tiles, marble, terrazzo, concrete, resin, wood or parquet floors.

Performance

Heavy-duty, suitable for up to 6.5 tonne pneumatic tyre wheel load.

If heavier loading required, please contact the office on 01920 463230.

Fire Rating

The 1050 Series is tested and fire rated to BS 476 - Part 22 for 2 hours on integrity in the case of a fire. This specification is for the use of the cover in a dead load environment only. If any permanent loads are applied this will invalidate the fire rating.

SINGLE: maximum size 1030 mm x 1030 mm, clear opening 900 mm x 900 mm

DUCT: maximum width 1020 mm, clear opening 900 mm with an unlimited duct run length

  • With full C40 concrete infill: fire rated for 2 hours on integrity and 2 hours for insulation
  • With stone, tile or other non-combustible surface finish: fire rated for 2 hours on integrity only

MULTIPART: maximum size 4m x 3m overall

  • With full C40 concrete infill: fire rated for 2 hours on integrity and 1 hour for insulation
  • With stone, tile or other non-combustible surface finish: fire rated for 2 hours on integrity only

*any floor access covers outside of the maximum sizes shown above will not be covered by our fire ratings*

Suitability

The 1050 Series Floor Access Cover from Howe Green is the first choice for demanding external and internal environments subject to heavy pedestrian or vehicular traffic where the emphasis on creating an attractive public realm is at the heart of the development and easy access is required to concealed underfloor services.

External and internal areas that require a Floor Access Cover with a deeper capacity to accommodate a thicker floor covering, such as granite.

The use of support beams and cross members enables complex designs to be manufactured to accommodate situations where a non-standard access solution is required.

Manufactured to Requirement

We manufacture Floor Access Covers, Edge Trims and Corner Guards quickly and easily to your exact size/configuration or special purpose requirements using CAD and C.N.C machinery at our manufacturing facility in Ware, Hertfordshire.

Advantages of using panels designed by FF Systems Inc.
  • Made in the USA
  • Fast Delivery On In-Stock Items
  • Economical Solution
  • Quick & Easy Installation
  • Solid Aluminum Frame
  • Superior Engineering & Innovative Design
  • Flush Installation In Ceilings & Walls
  • Virtually Invisible After Finished

FF Systems, Inc.

2840 Hunter Street

Fort Meyers, FL 33916

Tel: (888) 978-1808

Fax: (239) 288-4251

E-mail:Info@ffsystemsinc.com

Web Site: https://www.ffsystems.com/

545 Trillium Drive, Unit 2

Kitchener, ON N2R 1J4

Tel: (519) 896-0888


See More


Specifications

Performance Standards Howe Green - 1050 Series
SUITABILITYInterior and exterior solid floors
LOADINGUp to 6.5 tonne pneumatic tyre wheel load
WEIGHT220 kg/m²
SEALOptional Double Seal
FIRE RATINGBS 476 - Part 22 for integrity and insulation
Usage & Ratings
Specifications
ModelBNT/BNW/BNP
DoorBNT/BNW: 16 gauge Steel (removable) or 16 gauge Type 304 Stainless Steel
BNP: 14 gauge Steel or 16 gauge Type 304 Stainless Steel
Frame16 gauge Steel or 16 gauge Type 304 Stainless Steel
SizeMinimum: 6 inches by 6 inches
Maximum: 24 inches by 72 inches or 48 inches by 48 inches
InstallationWall or Ceiling
Flange1 inch exposed, Drywall Bead or Plaster Bead
LatchScrewdriver Cam Latch, Key Operated Cam Latch, or Mortise Lock (1-1/8 inch) Prep
HingeConcealed spring button
Pan Depth½ inch
FinishWhite Powder Coat (steel) or #4 Satin (stainless steel)
OptionsFlanges, Latches, Materials, Gaskets, Anchors
Warranty1 year
Measurements
Looking for measurements to plan for your project? See below for what you need.