FERO Corporation -FERO Thermal Slotted Block Tie (Type II)™

DOWNLOADS

FERO Thermal Slotted Block Tie (Type II)™

FERO THERMAL SLOTTED BLOCK TIE (TYPE II) affixes masonry veneer walls to a structural backing like concrete block masonry. This tie is designed to transfer lateral loads while accommodating construction tolerances. The Slotted Block Tie (Type II) system consists of a double-Slotted Block Plate, different from the Slotted Block Tie (Type I), which uses a single slot rather than two shorter slots. The two slots in the tie each allows...


Category: brick anchors | masonry ties | ties...

MasterFormat: Masonry Anchorage and Reinforcing | Masonry Anchors



FERO Corporation
15305 - 117th Avenue
Edmonton, AB T5M 3X4
Tel: (877) 703-4463
Fax: (780) 452-5969

sales@ferocorp.com

https://www.ferocorp.com/

Find a rep/distributor

Request More Info

DOWNLOADS

Related Products

Overview


FERO Thermal Slotted Block Tie (Type II)™

FERO THERMAL SLOTTED BLOCK TIE (TYPE II) affixes masonry veneer walls to a structural backing like concrete block masonry. This tie is designed to transfer lateral loads while accommodating construction tolerances. The Slotted Block Tie (Type II) system consists of a double-Slotted Block Plate, different from the Slotted Block Tie (Type I), which uses a single slot rather than two shorter slots. The two slots in the tie each allows up to 1 inch of vertical play, and this ensures vertical flexibility regardless of where the Plate is fastened to the masonry backing. This tie offers greater vertical adjustability, reduced displacement, and higher strength. The double-slotted plate is mortared directly into a head joint in the structural backing. This creates a stable integration and reduces any play, deflection or connector deterioration.This tie is not designed to resist movement vertically and can reduce the effectiveness of the entire wall assembly to function as a whole. To further resist movement, shear and load in cavity walls, check out our FERO THERMAL BLOCK SHEAR CONNECTOR™.

Benefits of FERO Thermal Slotted Block Tie (Type II)™
  • Accommodates any wall, cavity or insulation
  • Significantly reduces thermal bridging
  • Accommodates vertical differential movement within the wall system
  • Maximizes connector’s strength and permits up to 2.4” (60 mm) in-situ vertical adjustment
  • Provides positive restraint between tie components
  • Prevents disengagement and reduces mechanical free play
  • Eliminates the need for Tie Fasteners
  • Limits the need for inspection of spacing and tie placement
  • One trade installation


See More