FERO Corporation -FERO Thermal Heavy-Duty Holed Rap-Tie™

DOWNLOADS

FERO THERMAL HEAVY-DUTY HOLED RAP-TIE’s are designed to transfer lateral loads from the exterior masonry veneer to the structural backing with one fastener. The L-shaped, 16-gauge steel plate of the tie is fastened to the surface of the structural backing.


Category: brick anchors | masonry ties | ties...

MasterFormat: Masonry Anchorage andReinforcing | Masonry Anchors | Stone Anchors



FERO Corporation
15305 - 117th Avenue
Edmonton, AB T5M 3X4
Tel: (877) 703-4463
Fax: (780) 452-5969

sales@ferocorp.com

https://www.ferocorp.com/

Find a rep/distributor

Request More Info

DOWNLOADS

Related Products

Overview


FERO Thermal Heavy-Duty Holed Rap-Tie™

FERO THERMAL HEAVY-DUTY HOLED RAP-TIE’s are designed to transfer lateral loads from the exterior masonry veneer to the structural backing with one fastener. The L-shaped, 16-gauge steel plate of the tie is fastened to the surface of the structural backing. Holes sit along the far end of the plate, and the V-Tie is inserted into the corresponding hole, providing a constant connection of the veneer wall to the structural backing without any risk of veneer disengagement. By using multiple fasteners, both shear and axial forces can be resisted and the entire wall assembly functions as a whole. The wall thickness (including the veneer and structural backing) work to limit lateral load, offering reduced lateral deflections and increased resistance.

Benefits of FERO Thermal Heavy-duty Holed Rap-tie
  • Accommodates any wall, cavity or insulation widths, including large cavity sizes up to 16”
  • All FERO ties significantly reduce thermal bridging
  • Easy installation to studs or structural sheathing
  • Restrains components to eliminate disengagement
  • Reduces movement and free play
  • Reduces deformation caused by load
  • Deeper plate allows greater tolerance for optimal alignment
  • Installed by one trade


See More