Duro-Last Roofing, Inc. -Duro-Shield™ Coatings and Materials

DOWNLOADS

With constant exposure to heat, cold, UV radiation, rain, snow, hail and high winds, a roof can be the most vulnerable component of a building's exterior.


Category: elastomeric coatings | membrane roof coatings | roofing membrane...

MasterFormat: Maintenance of Membrane Roofing | Membrane Roofing | Elastomeric Coatings...



Duro-Last Roofing, Inc.
525 Morley Drive
Saginaw, MI 48601
Tel: (800) 248-0280
Fax: (800) 432-9331

Information@duro-last.com

https://duro-last.com/

Find a rep/distributor

Request More Info

DOWNLOADS

Related Products

Overview


Duro-Shield™ Coatings and Materials

With constant exposure to heat, cold, UV radiation, rain, snow, hail and high winds, a roof can be the most vulnerable component of a building's exterior. However, a roof's long-term performance can be enhanced - and major roofing problems avoided - with correct design, quality materials, proper installation and workmanship, and comprehensive care.

Duro-Shield Coatings and Materials can be used on a variety of substrates and are manufactured to help revitalize the life cycle of this critical asset.

Duro-Shield™ Silicone Roof Coating

Duro-Shield Silicone is a silicone-based roof coating designed to resist natural weathering while providing long-lasting watertight protection. When properly prepared and applied, following Duro-Last® specifications, Duro-Shield Silicone can be used on the following roof substrates:

  • Single-ply membranes:
    • Aged Duro-Last PVC (polyvinyl chloride)
    • Other aged PVC's
    • EPDM (ethylene propylene diene monomer)
    • TPO (thermoplastic polyolefin)
  • Spray-applied polyurethane foam
  • Mineral and granule-surface built up (BUR) and modified bitumen
  • Smooth-surfaced built up (BUR) and modified bitumen
  • Aged galvanized metal
  • Concrete
  • Wood
Duro-Shield™ Acrylic Roof Coatings

Duro-Shield Acrylic Roof Coatings - available in Duro-Shield 20 and Duro-Shield 10 - are 100% elastomeric acrylic and are designed to seal and protect a variety of substrates. When properly prepared and applied in accordance with Duro-Last specifications, the Duro-Shield Acrylic line of roof coatings can be used on the following roof substrates:

  • Single-ply membranes:
    • Duro-Last PVC
    • Other PVC's
    • EPDM
    • Hypalon® CSPE (chlorosulfonated polyethylene)
  • Mineral and granule-surface built up (BUR) and modified bitumen
  • Smooth-surfaced built up (BUR) and modified bitumen
  • Metal
  • Wood
Additional Duro-Shield Products

In addition to the Duro-Shield Silicone and Acrylic roof coatings, there are other supporting products in the coatings family:

  • Duro-Shield™ Silicone Brush Grade Sealant
  • Duro-Shield™ Silicone Roof Primer: Universal 2-Part Epoxy
  • Duro-Shield™ Silicone Roof Primer: TPO
  • Duro-Shield™ Acrylic Brush Grade Mastic
  • Duro-Shield™ Acrylic Primer
  • Polyester Reinforcement Fabric


See More


Specifications

WhiteGrayTan

*NOTE: GRAY AND TAN AVAILABLE IN DURO-SHIELD SILICONE ONLY.

Sweetsstakes