Dunbarton Corporation - Slimfold Steel Bifold Doors

DOWNLOADS
General Information Slimfold Bifold Folding Doors are prefinished steel doors designed specifically for wardrobe, closet, and washer / dryer enclosure openings. The exclusive Slimfold patented hardware system ensures dependable and quiet operation for years of maintenance free operation. Slimfold...

Category: bi-folding closet doors | bifolding closet doors | closet doors...

MasterFormat: Folding Doors and Grilles | Folding Doors | Closet Doors...



Dunbarton Corporation
1101 Technology Drive
Dothan, AL 36303
Tel: (800) 633-7553
Fax: (334) 793-7022

sales@dunbarton.com

http://www.dunbarton.com

Find a rep/distributor

Request More Info

DOWNLOADS

Related Products

Overview



Slimfold Steel Bifold Doors

Slimfold Steel Bifold Doors

General Information

Slimfold Bifold Folding Doors are prefinished steel doors designed specifically for wardrobe, closet, and washer / dryer enclosure openings. The exclusive Slimfold patented hardware system ensures dependable and quiet operation for years of maintenance free operation. Slimfold Bifold doors meet or exceed Voluntary Product Standards PS38-70, as published by the U.S. Department of Commerce, National Bureau of Standards.

Applications

Single-family housing

Multi-family housing

Educational housing facilities

Manufactured homes

Door Styles

A. Flush
B. Louver II
C. Lancaster
D. Westchester
E. Roanoke
F. Classic

Product Information

Door panels and reinforcing stiffeners shall be 24 gauge ASTM A366 commercial quality cold rolled steel. Alternate for coastal areas with high salt content atmosphere: 24 gauge galvannealed steel having an A40 coating per ASTM A653. Also recommended for bathrooms, laundry rooms, HVAC areas or any high-humidity situation. Contact factory for proper re-painting instructions. Steel options: smooth or leathergrain texture.

Door panels shall be accurately formed and reinforced with 4" (102 mm) wide stiffeners welded to backs and flanges of panels. Panels shall be hinged in pairs with a minimum of 10" (254 mm) of piano-type hinges. Panels to be sound-deadened with corrugated fiberboard or absorbent, as an option.

All mounting hardware shall be factory installed. Rods to be cold rolled steel with a zinc dichromate finish. Patented weight bearing pivot rods to be 5/16" (8 mm) diameter, adjustable screw type, and securely held in position by nylon rod clamp assemblies. Guide rods and upper pivot rods shall be 1/4" (6 mm) in diameter, spring loaded for easy self-alignment, and securely held in position by self-retaining nylon sleeves. Top and bottom tracks to be 22 gauge prefinished galvanized steel. Top and bottom track option: .050" aluminum extrusion 6063-T5 alloy. Pivot sockets and rubber track bumpers shall be adjustable to allow lateral alignment and be preset in the tracks. Sockets to be zinc plated cold rolled steel and waxed. Door to be supplied prefinished. Hardware packages consisting of knobs or pulls, screws, and felt discs to be supplied with each door.

Finishes

A. Door manufacturer's standard baked on synthetic enamel, applied over a cleaned and phosphate coated surface. Paint dry film thickness shall be approximately 1.0 mil in the following colors:

  1. Bright White
  2. Ivory

Slimfold Products Limited Lifetime Warranty

Slimfold® Products Division warrants to the purchaser that its products, when utilized for interior door use, will be free from defects in materials and workmanship for the life of the product.

Slimfold® Products manufactured with galvanized steel are additionally warranted against rusting for a period of one (1) year from the date of purchase, provided the finish has not been cut or abraded through the metal. Galvanized steel should be used where air has a high salt content or in locations with high humidity; see specifications.

This warranty is applicable only when the products covered by it have been installed in accordance with the recommended written installation instructions of Slimfold® Products Division and with established building practices, have been accorded treatment which is considered good practice in the building industry regarding storage and maintenance, and have been subjected only to normal use. Because Slimfold® Products Division cannot control the manner in which its products are handled after leaving its premises, this warranty does not apply to the finish or other damage occurring during shipment.

There are no warranties, express or implied, which extend beyond the description on the face hereof, including the implied warranty of merchantability and the implied warranty of fitness for a particular purpose.

Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply in some cases.

In the event the original consumer purchaser of any Slimfold® product believes that the door or any parts thereof covered by this warranty is defective, a letter outlining the alleged defect should be sent postage prepaid to the following address:

Slimfold® Products
Division of the Dunbarton Corporation
P.O. Box 8577 Dothan, Alabama 36304-0577

Any Slimfold® Products part covered by this warranty which, upon inspection by an authorized representative of Slimfold® Products Division, are found by said representative to be defective, will be repaired or replaced at the option of Slimfold® Products Division. The purchase price of the part will be refunded and does not include labor, installation costs, finishing costs, or indirect or consequential damages of any nature. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.

This warranty bestows certain legal rights, and you may also have other rights which vary from state to state.

Dunbarton Corporation
1101 Technology Drive
Dothan, Alabama 36303
Tel: (800) 633-7553
Fax: (334) 793-7022
E-mail: sales@dunbarton.com
Web site: http://www.dunbarton.com





Sweets app for Revit – Learn More