DoorKing, Inc. -Power Inverter & Backup Systems

DOWNLOADS

DoorKing’s Model 1000 Power Inverter and Backup system is designed to provide backup power for your vehicular gate operator and access control system when primary (AC) power fails.


Category: access control accessories | access control systems | electronic security...

MasterFormat: Access Control | Fences and Gates | Gate Operators



DoorKing, Inc.
120 S. Glasgow Avenue
Inglewood, CA 90301
Tel: (800) 826-7493
Fax: (310) 641-1586

info@doorking.com

https://www.doorking.com/

Find a rep/distributor

Request More Info

DOWNLOADS

Related Products

Overview


Power Inverter & Backup Systems

No Power, No Problem

DoorKing’s Model 1000 Power Inverter and Backup system is designed to provide backup power for your vehicular gate operator and access control system when primary (AC) power fails. Unlike DC Gate Operators that can only back-up the gate operator itself with internal batteries to run the DC motor, the model 1000 converts DC battery power to AC power to keep all system components, even the ones that are powered by AC Accessory transformers, operable at all times. DC gate operators do not convert their battery power to AC rendering all AC components of your system inoperable.

Power Outages

Model 1000 can run your Access Control System during power outages.

Maintains power to all components of the Vehicular Gate System including the Gate Operator, Loop Detectors, Secondary Entrapment Prevention Devices, Telephone Entry System, Card Access System, RF Controls, etc.

Compatibility

Suitable for use with DoorKing Class I and Class II gate operators and most other residential / light commercial gate operator brands.

Power Backup

Model 1000 can run your Access Control System during power outages.

Converts

12 Volt DC to 120 Volt AC

Battery Charger

during normal operation

Two 35 Amp Hour

SLA Batteries fit inside the cabinet

Specifications

  • AC Output Voltage is 120 VAC, 60 Hz
  • Continuous Power Output is 1000 Watts
  • Pure Sine-Wave output can power two 1/2 HP gate operator systems or a single 1 HP system
  • DC Input voltage is 12 VDC
  • Operating temperature 23°F (-5°C) to 104°F (40°C)
  • Low voltage alarm 10.2 - 10.8 VDC
  • Uses two (2) Maintenance Free, Rechargeable, Non-spillable, Sealed Lead-Acid (SLA), 12-Volt, 35 AH.
  • IMPORTANT! Use only with gate operators that utilize PSC motors. Do not use with operators that utilize motors with separate start and run windings.

Mechanical

  • Selectable power out and power start options.
  • Selectable continuous operation mode or quick open mode.
  • Pure sine-wave output.
  • Electronic control circuit monitors battery voltage while system is in inverter mode and commands gate operators to open when battery power reaches critical levels.

Options

  • Post Mount Kit P/N 1000-045
  • Battery Cable Set P/N 1000-044
  • 12-Volt, 35 Ah SLA Battery P/N 1801-005


See More