MICROCLIK® RF Controls - Access Control

Copy the Codes to Your Car’s Built-in Transmitters

Model 8040 Receiver

The 8040 sends the transmitter codes to a access controller (such as a DKS 1830 Series System) in wiegand format. This receiver can also be programmed as a stand-alone device. It is also ideal for solar-powered applications as it has an extremely low power draw while in stand-by mode.

This Receiver can be programmed to receive a signal from the MICROPLUS or MICROCLIK Transmitters, which allows the homeowner to choose their
type of Remote.

Model 8057 Receiver

The 8057 Receiver is a fully programmable stand-alone receiver that can store up to 16,000 transmitter codes. Codes can be added or deleted individually, or in block format.

The 8040 Receiver is also a low-power draw unit designed specifically for the solar application. It remains in a ″sleep″ mode until it receives a signal from a Transmitter, thus drawing about 1 milli-amp of power.

PROXmitters™

Same as the standard transmitter but also include a built-in proximity card. Over 1,000,000 transmitter codes available

Visor Clip

The optional visor clip is a handy accessory that allows you to mount your transmitter onto the sun visor in your vehicle for easy access and convenience.

Antenna Options

Directional Yagi antenna for improved range, and antenna amplifiers.

Compatible

HomeLink® compatible: copy your codes to your vehicle’s built-in system.

Safety / Convenience

Provides remote operation of gates from inside your vehicle. (Range up to 75 feet)

Specifications

8040 Receiver

• Primarily used as a 26, 30 or 31-bit wiegand output receiver
• Can be set for stand-alone operation, 100 codes maximum
• Low power mode for solar-powered operation
• Can be used with MICROCLIK or MICROPLUS transmitters
• Form C relay.
• 12-24 volt AC or DC.

8057 Receiver

• Stand-alone receiver
• Stores up to 16,000 MICROCLIK transmitter codes
• Built-in programming keypad
• Add or delete transmitters individually or in block format
• Programmable facility codes, relay strike time, transmitter button number
• Form C dry contact relay
• 12-24 Volt AC or DC

Options

• Model 8057 receiver memory: 50, 100, 250, 500, 1000, 5000, 16000 - choose one.
• Transmitters: 1, 2 or 3 button.
• PROXMTR: DK ProxPlus, DK Prox, AWID or HID proximity tags - specify which.

Mechanical

• Provides remote operation of vehicular access gates from the safety and convenience of a vehicle
• Over 1,000,000 transmitter codes available
• PROXMTR^® includes a built in proximity card with the MICROCLIK transmitter combining both RF and card access control into a single compact unit
• Transmitters available with 1, 2 or 3 buttons
• MICROCLIK RF controls may be used as a stand-alone access control system or can be interfaced with 26 or 31-bit wiegand controllers
• HomeLink® compatible

Listings

• FCC (US): LSD8059RX
• FCC (US): LSD8068T
• DOC (CAN): 1736 102 138

See More

See Less