1603 AutoSpikes - Traffic Control

For a Higher Degree of Traffic Control

The DKS 1603 Barrier Gate Operator Automated Spike System is designed as a modular system, allowing for easy flexibility in different applications and easy installation. The 1603 Operator is designed with many advanced features and mechanically links the Spikes to the Barrier Arm. Ideal for parking lots, rental car agencies, schools, car dealerships, government agencies, or in any application where a higher degree of traffic control is preferred.

A typical system will require the 1603 Operator, a Drive Extension, Tunnel Section(s) as needed, Spike Section(s) as needed, and an end cap. A Traffic Signal and/or Warning Sign is required with this system. Contact your professional DKS system installer, or DoorKing directly, for more information on complete system requirements.

CAUTION: not to be used in areas subject to freezing weather with the potential for snow and ice accumulation. Maximum 20,000 lb. per axle weight limit on spike sections.

With advancements in automotive tire construction, and with the many different types, sizes and styles of tires, we cannot guarantee that traffic control spikes will penetrate all tires. For use with automotive and light pickup trucks only. The DKS 1603 Barrier Gate Operator Automated Spike System is designed as a modular system, allowing for easy flexibility in different applications and easy installation. The 1603 Operator is designed with many advanced features and mechanically links the Spikes to the Barrier Arm. Ideal for parking lots, rental car agencies, schools, car dealerships, government agencies, or in any application where a higher degree of traffic control is preferred.

Features:

• Magnetic limit control.
• Ports for plug-in loop detectors.
• Automatic sequencing inputs for use with slide and swing gate operators.
• Up input memory buffer.
• Down memory option.
• Multiple up commands.
• Two convenience outlets.
• Gate tracker reporting output.
• Programming switches.
• Built-in power On/Off switch.
• Left or right hand mount.

Specifications:

1603

• 1/2 HP continuous-duty motor.
• 115, 230°, 460° VAC. (*230 and 460 volt units use a step-down power transformer to achieve 115 volt operating voltage.)
• 40:1 gear-box running in a continuous oil bath.
• Arm rotates 90° in approximately 2.5 seconds.
• Class II, III and IV applications.
• Compliant with UL 325 and 991. (Note: To be compliant with UL 325 and industry safety guidelines, entrapment protection devices need to be installed with this gate operator. Your professional DKS system installer can provide you with more details on these devices and on current industry safety standards.)
• Dimensions: 15.25"W x 43.5"H x 15.5"D.

Spike Components

• Maximum 20,000 Lb. per axle weight limit.
• Tunnel sections surface mount: 31"W x 3"H x 24 or 36"L
• Spike sections surface mount: 31"W x 3"H x 36"L
• End Cap: 31"W x 3"H x 12.25"L

Options:

• 14 - Foot Octagonal Aluminum Arm.
• 14 - Foot Octangonal Aluminum Arm Rev Edge + Lighted Red / Green LEDs.
• 14 - Foot Octangonal Aluminum Arm Rev Edge.
• 14 - Foot Round Aluminum Arm.
• DKS Pedestrian Protection System
• Plug-in loop detectors.
• DC powered convenience open.
• Heater kit.
• Fan kit.
• Surge suppressors.
• Manual Crank kit.

See More

See Less