Fire Rated Coiling Doors - UL Listed Roll Up Fire Doors
In the event of a fire, our roll up fire doors are engineered to save lives and protect property by compartmentalizing building areas and isolating the incident. In addition to preventing the migration of fire, they also provide security and access control in wall openings that are not a required means of egress.
These fire rated roll up doors provide the opportunity for simple, reliable, fail safe activation that seals the openings at the first hint of a fire.
Fire doors are manufactured to your specifications to seal these openings where rated doors are required by building codes when insurance fire safety standards mandates must be met.
SmokeShield® for Fire Rated Coiling Doors
Our fire rated rolling doors are also available with an optional SmokeShield® package. This package adds smoke and draft control which is listed to UL1784, assuring that smoke is compartmentalized with the fire and not spread throughout the facility.
Our rolling fire door is UL listed, Factory Mutual Approved and listed with the California Office of the State Fire Marshall. It is also listed for fire protection ratings of 45 minute, 90 minute, 3 and 4 hours.
Sizes
A standard UL labeled fire door is available up to 13.5' wide by 12' high.An oversized UL labeled fire door is available up to 60' wide by 40' high or 1,200 sq. ft.
Standard Materials and Finishes
Fire Door curtains are available in:
• 22, 20 and 18 gauge galvanized steel:
‒ Exclusive GalvaNex™ finish in Gray, Tan, White or Brown provided as standard
• 20 gauge 300 series stainless steel:
‒ #4 finish
Stamped steel or cast iron endlocks are provided per UL procedure.
Mounting Options
Fire doors can be installed face of wall or between jambs on an interior or exterior wall. Acceptable wall types include masonry, structural steel jambs and drywall construction with structural steel or wood studs.
Fire Specific Options
Battery Back Up Devices
Available for motor, chain and crank operators, these devices prevent fire doors from closing from a power failure.
Firefly & Firefly BB Release Device
Optional device that ties in to a building alarm system and closes a Simple-Test fire door upon alarm activation, rather than by melting its fusible link.
SmokeShield® Seal Package
Often required by local building codes, our smoke seal adds smoke and draft control.
Testing Stations
Safely and conveniently test and reset the functionality of the fire door at floor level. May be flush or recess mounted.
Aesthetics
Omni Powder Coat Finish
Our environmentally friendly Omni Powder Coat helps you to match your rolling steel door to select Clopay sectional doors.
Omni Powder Coat is available in:
- Commercial Tan
- Commercial Gray
- Charcoal
- Standard White
- Chocolate Brown
- Black
SpectraShield™ Powder Coat Finish
Polyester finish in more than 180 colors for durability, aesthetics, superior finish life and cost effectiveness.
Hood and Operator Covers
Metal cover to protect the coil or operator from exterior weather, debris or to meet OSHA or UL 325 safety requirements.
Performance Upgrades
High Cycle Springs
Heavy duty springs manufactured to withstand cycles of 100,000.
Seismic Performance Validation
We can provide project specific seismic calculations for all coiling doors that are mounted Face of Wall to steel or masonry. Seismic performance validation is per ASCE 7-05.
Safety and Protection
Sensing Edge - Entrapment Protection Device
Designed with a flexible black rubber TPE material, our new sensing edge has two fins that conform to variations in the floor on both the interior and exterior of your door or grille ensuring a secure seal without requiring you to overset the bottom door limit. The sensing edge is easy to clean and remains free from rust and dirt stains, maintaining a fresh uniform appearance. With flexible 1" sealing fins, our sensing edges provide maximum protection while withstanding the elements.
Edges are tested and listed to UL 10B as a component of the rolling steel fire door assembly.
To determine the best entrapment device for your application, check out our Entrapment Device Protection Overview document.
Entrapment Protection Devices
Entrapment protection devices ensure that a motorized door or grille will not close on an object. If an object enters path of closure, the entrapment protection device will stop the door or grille from closing and return it to the fully open position.
Guide-Mounted Interlocks
An electrical cutout switch to prevent motor operation if locking device is not first disengaged.
Rolling Door Protector (RDP)
The RDP eliminates costly fork truck damage to coiling doors by creating a physical barrier at the top of the door that absorbs impacts.
Static Wind Load
Can be configured to withstand the full range of specific wind load requirements including missile impact ratings.
Unique Design Solutions
Sloping or Irregular Openings
Our special bottom bar designs can address these conditions.
SmartSync Wireless Safety Edge Kit
SmartSync™ Wireless Safety Edge Kit & Wireless Remote Control
The Smartsync™ Safety Edge Kit is an upgrade for our existing Safety Edge. This allows for wireless communication between the transmitter and the receiver, eliminating the coiling cord in the door opening.
The Smartsync™ Wireless Remote allows wireless control of your door or grille. This heavy-duty remote comes equipped with an anti-shock design and is compatible with most motor-operated doors, grilles or counter doors.**Not compatible with NEMA 7/9 operators.
See More
See Less