Cookson -EntryDefender® Door - Defender Series

DOWNLOADS

The platinum award winning EntryDefender® Door is manufactured to protect official government buildings, medical and legal marijuana dispensaries, manufacturing facilities, and other sensitive designs from break-in for 5, 15 and 60 minutes in accordance with the U.S.


Category: high speed traffic doors | high-cycle traffic doors | hurricane doors...

MasterFormat: Specialty Doors and Frames | Coiling Doors and Grilles | Overhead Coiling Doors...


Related Products

Overview


EntryDefender® Door - Defender Series

The platinum award winning EntryDefender® Door is manufactured to protect official government buildings, medical and legal marijuana dispensaries, manufacturing facilities, and other sensitive designs from break-in for 5, 15 and 60 minutes in accordance with the U.S. Department of State Standard for forced entry SD-STD-01.01, Revision G (Amended). The EntryDefender is the only roll up door in the country that allows experts to customize design in wide doorways without jeopardizing safety and complies with regulations.The EntryDefender Door is ASTM F3038 Compliant.

It may look like a common roll up door from the outside, but the sturdy steel curtain features interlocking slats that contract when in the closed position - creating an even surface that diminishes potential pry points. As the assault continues, the interlocking slats combine together further to avoid division and make the door even more stable. It also features an enhanced bottom bar and hidden locking system that further holds the door closed.

American Security Today Magazine awarded the extraordinary EntryDefender Door with the Platinum Award for Best Critical Infrastructure Protection Solution at the 2019 Astors Awards.

Listings

The EntryDefender Door meets the U.S. Department of State Standard for forced entry SD-STD-01.01, Revision G (Amended) for a 5, 15 and 60 minute attack.The EntryDefender Door is ASTM F3038 Compliant.

The government standard for forced entry (CODE) was designed for attacks that escalate - not planned attacks. That’s why the testing required for this code requires six men between the ages of 18 and 24 that weigh more than 160 but less than 250 pounds to try and pass a rigid rectangular shape measuring 12” x 12” x 8” or a rigid 12” x 12” cylinder through the door using hand tools such as battering rams, axes, crowbars, and the like.

Sizes

The maximum size available will vary slightly based on the wall construction. If the wall construction is steel, the maximum size is 13’ 11 1/4" wide by 16’ high. If the wall construction is concrete, the maximum size is 13' 8 3/4" wide by 16' high.

Usage

The EntryDefender Door is designed to operate to 20,000 cycles (lifetime) as standard, but can also be customized to handle additional cycles if desired.

Standard Material & Finishes

The standard materialsand finishes for EntryDefender are:

Curtain - 12 gauge 4” flat steel slat with SpectraShield® powder coat in gray.

Guides - Steel with powder coating to match the curtain.

Bottom Bar - 12 gauge 4” face steel bottom bar with powder coat to match the curtain.

Available Operators

The EntryDefender Door features the SG motor operator as standard. It is UL-325 listed with a chain and sprocket drive. It also includes an interlock to prevent operation while locks are engaged.

Static Wind Load

The EntryDefender door is designed for a static wind load of up to 125 psf.

Safety & Protection

Sensing Edge - Entrapment Protection Device

Designed with a flexible black rubber TPE material, our new sensing edge has two fins that conform to variations in the floor on both the interior and exterior of your door or grille ensuring a secure seal without requiring you to overset the bottom door limit. The sensing edge is easy to clean and remains free from rust and dirt stains, maintaining a fresh uniform appearance. With flexible 1" sealing fins, our sensing edges provide maximum protection while withstanding the elements.

Edges are tested and listed to UL 10B as a component of the rolling steel fire door assembly.

To determine the best entrapment device for your application, check out our Entrapment Device Protection Overview document.

Aesthetics

AtmoShield™ Powder Coating

Textured powder coat finish that combats the environments harsh wear and tear. This finish provides a thicker, more scratch resistant coat for added product protection.

SpectraShield™ Powder Coat Finish

Polyester finish in more than 180 colors for durability, aesthetics, superior finish life and cost effectiveness.

LED Light Kit

The LED Light Kit provides a high-visible status indication for overhead doors and grilles. Designed for challenging environments like fire and emergency services, parking garages, and warehouses, the effective LED light strips limit downtime, maintenance, and repair costs.

SmartSync Wireless Safety Edge Kit

SmartSync™ Wireless Safety Edge Kit & Wireless Remote Control

The Smartsync™ Safety Edge Kit is an upgrade for our existing Safety Edge. This allows for wireless communication between the transmitter and the receiver, eliminating the coiling cord in the door opening.

The Smartsync™ Wireless Remote allows wireless control of your door or grille. This heavy-duty remote comes equipped with an anti-shock design and is compatible with most motor-operated doors, grilles or counter doors.**Not compatible with NEMA 7/9 operators.


See More


Specifications

Resistance Rating
Model #Resistance Rating
PED0101-055 minutes
PED0101-1515 minutes
PED0101-6060 minutes