CORLIX® Corrugated Aluminum Culvert and Drainage Pipe
CORLIX corrugated aluminum culvert and drainage pipe is the ideal pipe for municipal culverts, storm sewers, underground stormwater detention systems or any standard drainage project that must withstand alkali soils and erosive environments.
The Ideal Pipe for Alkali Soils and Erosive EnvironmentsCORLIX® aluminum culvert and drainage pipe provides a predictable service life of more than 75 years. It is the ideal pipe for municipal culverts, storm sewers, underground storm water detention systems or any standard drainage project that must withstand alkali soils and erosive environments. In addition to its long design life, CORLIX is an economical alternative to reinforced concrete pipe.
CORLIX weighs only 1/35 as much as reinforced concrete. Lighter weight means easier installation. Trench width (and depth) are reduced due to the smaller outside diameter, resulting in time and cost savings for both excavation and backfill.
Single lengths up to 40 feet ensure more accurate pipe alignment at time of placement and through the life of the system. Longer lengths save installation time with fewer joints.
Easy, fast pipe cutting on the job is simple with standard tools. Since there are no riveted joints, CORLIX can be cut at any point. Cuts and welds need no protective treatment. Wide availability of fittings saves installation time in the field. Fabricated elbows, manholes and catch basins minimize hydraulic losses at junction structures.
CORLIX Features and BenefitsFEATURES
Fabricated from special aluminum clad culvert material
Corrosion resistant
Weighs 1/35 as much as reinforced concrete
Longer lengths than reinforced concrete pipe
Smaller outside diameter than reinforced concrete pipe
BENEFITS
Service life of more than 75 years
Can be used in alkali soils, salt water, and erosive environments
Easier, faster installation
Fewer joints, faster installation, and more accurate pipe alignment
Less excavation, faster installation, reduced cost
CORLIX Aluminum Pipe Properties - Wall thicknesses of 18, 16, 14, 12, 10 and 8 gage
- Pipe diameter ranges from 6” to 120”
CORLIX Aluminum Pipe Shapes - Full Round - recommended for most applications
- Pipe-Arch - low, wide pipe-arch design distributes the area horizontally to provide adequate capacity without raising the grade
- Perforated pipe for underdrainage or recharge systems is available
CORLIX Aluminum Pipe Accessories - End Sections
- Joint & Banding Systems
- Fittings
- MOBILE PIPE®
CORLIX Aluminum Pipe Applications - Culverts, canals and ditch enclosures
- Storm sewers
- Stormwater detention and infiltration
See More
See Less