Terra Cotta Glaze (MasonRE Terra Coat) - 5 Gallon
SKU # 1077
Availability: In stock Glaze Repair for Terra Cotta and Brick
TerraCoat ClearCoat is a non-yellowing, water-based, acrylic coating that highlights the natural color of masonry by providing a clear, semi-gloss sheen. The treatment does not alter the natural texture of the surface, nor significantly affect the vapor transmission qualities of the substrate. TerraCoat provides a durable finish to terra cotta and masonry surfaces.Features and Benefits
Water-Based Acrylic: For easier clean up.
Vapor Permeability Similar to Glazed Architectural Tiles
Good Exterior Performance:Highly Abrasion-, Stain-, and Chemical- Resistant.
Use Jahn M100 or M125 to repair the clay body of terra cotta tiles where necessary. The repair mortar must cure for 14 - 28 days before the application of TerraCoat Glaze Repair. Apply MASONRE® Coatings to the substrate and wait 24-48 hours before applying Terra Coat. The surface must be clean, dry and free of oil, grease and other contaminants.
Mix well prior to application. Apply using airless paint spray equipment, brush or roller. When using an airless sprayer, use a 0.015 or 0.018 fan spray tip and reduce pressure to point of minimal misting or fogging to produce a wet application. Multiple applications may be necessary when applying to porous substrates or when a high gloss is desired; when this occurs, apply coats at right angles to each other with 4 to 6 hours between applications.
At 75° F (24 ° C): To touch 30 to 45 minutes. To handle: 2 to 3 hours. To recoat: 1 to 2 hours. Curing time varies with surface temperature, air movement, humidity and film thickness.
Clean equipment after use with mild detergent and water.
The ideal temperature conditions for applying TerraCoat ClearCoat is between 60° - 90° F. If the ambient and substrate temperatures do not fall in this range.
ClearCoat: Approx. 125 sq ft/gal
Coverage will depend on substrate absorption. Coverage rates are approximate and a test application must be performed to determine the exact coverage rate to achieve desired performance characteristics and aesthetic appearance before beginning a job.
Storage and Shelf Life
Store material in a dry area away from direct sunlight. Ambient storage conditions should be in the range of 35° F (2° C) to 100° F (38° C). Average shelf life is twelve months in original, unopened packaging at recommended storage temperature. Do not allow containers to freeze.
Volume Solids: 28%
Flash Point:>212° F