Bromic Heating - Tungsten Smart-Heat™ Gas Radiant Heater

Tungsten Smart-Heat™ Gas Radiant Heater

Category: fuel fired heaters | fuel-fired unit heaters | gas fired heaters...

MasterFormat: Gas-Fired Radiant Heaters | Fuel-Fired Unit Heaters | Radiant Heating Units...

Bromic Heating
18 Technology Drive, Ste. 121
Irvine, CA 92618
Tel: (800) 301-1293
Fax: (858) 346-1388

Find a rep/distributor

Request More Info


Related Products


Tungsten Smart-Heat™ Gas Radiant Heater

High-performance heating…

The Tungsten Smart-Heat™ Gas range provides unadulterated heating performance in its purest form. Powered by highly-efficient gas-fired ceramic burners, this heater utilizes an open mesh shield to prioritize performance and provide powerful heating across an impressive heating area. A combination of rugged design and impressive wind resistance makes the Tungsten an obvious choice in harsh, high-exposure applications where performance is paramount.

  • High-Performance Mesh Screen

    The Tungsten’s unique screen scientifically manipulates infrared energy to maximize performance while achieving a superior spread of heat

  • Ceramic Efficiency

    Slow-release ceramic burners efficiently combust gas to fuel the most environmentally friendly gas-fired heating method available

  • Strong, Directional Heat

    Robust radiant heat output with an easy pivot arm bracket for greater positioning versatility

  • Patented Direct Ignition

    Automated direct ignition eliminates the need for a pilot, resulting in instantaneous ignition

  • Ultra-Durable Design

    Stainless steel construction ensures reliable heating for years to come

  • Ease Of Use

    Smart system compatibility and automated re-ignition allows users to simply set and forget

  • Exceptional Wind Resistance

    Patented screen and ionization probe technology enables remarkable wind resistance, functioning reliably in winds of up to 12km/h or 8mph

  • Versatile Mounting

    Reclaim valuable floor space through fixed heating with a range of ceiling and wall mounting options

  • Wireless Control Capabilities

    Genuine wireless control accessories allow seamless integration of remote heater control


Bromic Heater Ceiling Poles

Bromic’s Gas Heater Ceiling Poles offer the ability to mount two units back-to-back below flat or pitched ceilings up to 4m/13’ above the floor. Pre-cut kits are available in 200mm/7.9” increments between 246mm/9.7” and 1046mm/3’5” in length to optimize heater heights in applications with ceilings between 3.2m/10’6” and 4m/13’ above the ground.

Bromic Heat Deflector

Bromic’s Gas Heat Deflectors reduce the clearance required between the top of a heater and the surface above from 1100mm/3’7” to 350mm/1’1” by absorbing heat that would otherwise escape vertically. This stainless steel deflector is unique in its dual layer construction, using the rigid top layer for reinforcement while reducing radiation of heat absorbed by the bottom layer.

Wireless Control Solutions

Bromic Heating Wireless Controller

The Bromic Heating Wireless Controller has the ability to switch power supply to two separate circuits, enabling independent ‘On/Off’ control of up to two electric or four gas heaters. The unit’s included radio transmitter offers control from up to 30m or 100ft away and is entirely portable, although it can be easily mounted with a double-sided adhesive or with screw provisions within the case.

Bromic Heating Wireless Master Remote

The Bromic Heating Wireless Master Remote offers complete comfort control and user-programmable customization to those wishing to implement our wireless control solutions on a grand scale. This radio transmitter can adjust an unlimited number of controllers in 6 groups from a single point within its 30m or 100ft range and is a must for larger venues.

See More


Model 300-Series 500-Series
Energy Type LPG (Propane) / NG LPG (Propane) / NG
Heat Output 27MJ / 26,000BTU 45MJ / 43,000BTU
Heat Area 15m2 / 160 2 20m2 / 200ft2
Power Connection 240V Type I plug / 240V Type F plug / 120V Type B plug 240V Type I plug / 240V Type F plug / 120V Type B plug
Minimum Mounting Height Wall Mount: 2000mm/6'6" Ceiling Pole Mount: 2500mm / 8'2" Wall Mount: 2000mm/6'6" Ceiling Pole Mount: 2500mm / 8'2"
Minimum Distance to Combustible Materials Side: 1100mm / 3'7" With deflector above (to ceiling): 1100mm / 3'7" Without deflector above (to ceiling): 350mm / 1'2" Side: 1100mm / 3'7" With deflector above (to ceiling): 1100mm / 3'7" Without deflector above (to ceiling): 350mm / 1'2"
Weight 14kg / 33lb 18kg / 40lb
Metric Dimensions 490mm x 382mm x 298mm 646mm x 382mm x 298mm
Imperial Dimensions 19.29" x 15" x 14.25" 25.43" x 15" x 14.25"
Sweets app for Revit – Learn More