Berridge Metal Roof and Wall Panels -Tee-Panel Standing Seam System

DOWNLOADS

The architectural metal standing seam Berridge Tee-Panel is designed for residential or commercial construction over solid sheathing.


Category: integral standing seam roofing | interlocking roofing | metal roofing...

MasterFormat: Roofing and Siding Panels | Roof Panels | Metal Roof Panels...



Berridge Metal Roof and Wall Panels
2610 Harry Wurzbach
San Antonio, TX 78209
Tel: (800) 669-0009
Fax: (210) 650-0379

info@berridge.com

https://www.berridge.com/

Find a rep/distributor

Request More Info

DOWNLOADS

Related Products

Overview


Tee-Panel Standing Seam System

The architectural metal standing seam Berridge Tee-Panel is designed for residential or commercial construction over solid sheathing. This 1″ high panel comes with an exclusive vinyl weatherseal as an integral part of the snap-on seam and can be used in curved and/or tapered applications.

Materials
24 Gauge Steel
Limited Availability: 22 Gauge Steel, 0.032 Aluminum

Specifications
Uses: Roof, Fascia*
Coverage: 12 3/4"
Finishes: Smooth
Fasteners: Concealed
Applications: Solid sheathing
Seam: 1" snap-on with extruded vinyl weatherseal

Installation
Panel is available from the factory in continuous lengths to a maximum of 40’
May be site formed in continuous lengths with the Berridge SS-14 Roll Former
Extruded vinyl weatherseal is an integral part of snap-on seam cap and prevents siphoning or flooding over seam
Extra snap-on seam caps are factory formed to a maximum of 40’
Use Seam Sleeve for splicing Tee-Panel snap-on seams
Entire roof area shall be covered with Berridge approved underlayment
Use 1” Tee-Clip with Steel panels**
Use 1” Stainless Tee-Clip with Aluminum panels**

Note: * Fascia can not be curved or tapered. Please consult the Curved and/or Tapered Tee-Panel page for more information on the panel’s curving and tapering abilities. ** Consult Berridge Technical for clip spacing


See More


Specifications

Sweetsstakes