Berridge Metal Roof and Wall Panels -FW-1025 Panel - Wall, Soffit, and Liner

DOWNLOADS

The Berridge FW-1025 and FW-12 Panels can be installed on wall, soffit and liner applications. The prefinished metal wall panels can be used over open framing or with solid sheathing.


Category: exterior cladding | exterior wall panels | facade cladding...

MasterFormat: Roofing and Siding Panels | Wall Panels | Metal Wall Panels...



Berridge Metal Roof and Wall Panels
2610 Harry Wurzbach
San Antonio, TX 78209
Tel: (800) 669-0009
Fax: (210) 650-0379

info@berridge.com

https://www.berridge.com/

Find a rep/distributor

Request More Info

DOWNLOADS

Related Products

Overview


FW-1025 Panel - Wall, Soffit, and Liner

The Berridge FW-1025 and FW-12 Panels can be installed on wall, soffit and liner applications. The prefinished metal wall panels can be used over open framing or with solid sheathing. Additionally, the panel can be ordered smooth, with vee-grooves, striated, vented or with a stucco texture thus allowing for countless design options.

Materials
24 and 22 Gauge Steel
0.032 and 0.040 Aluminum

Specifications
Uses: Wall, Soffit, Ceiling, Fascia, Screen Wall
Coverage: FW-1025: 101/4"
Finishes: Smooth, optional stucco emboss
Fasteners: Concealed
Applications: Vertical over open framing or solid sheathing
Pattern: Optional vee-grooves, striations or venting
Optional: Seam lock feature

Installation
Panel is available from the factory in continuous lengths to a maximum of 40’
Vented option provides 7.79 square inches of Net Free Vent Area (NFVA) per linear foot (6.65 in2/ft2). (BMC does not recommend vented products in applications subject to aggressive atmospheres, marine environments, or high humidity due to the corrosive nature of these environments on raw edges of steel.)
22 Gauge material may require 4,500 sq minimum order
Requires seam-locking feature for Florida Product Approvals or Miami Dade NOA


See More


Specifications