Battic Door Attic Access Solutions -The Battic Door E-Z Hatch Attic Access Door

DOWNLOADS

Fits into a 22 ½” x 30 ½” Rough Opening

2 STYLES: STANDARD OR DELUXE (INCLUDES KEYED LOCK)


Category: access covers | attic hatch | attic hatches...

MasterFormat: Specialty Doors and Frames | Access Doors and Panels



Battic Door Attic Access Solutions
P.O. Box 15
Mansfield, MA 02048
Tel: (508) 320-9082
Fax: (774) 215-5860

info@batticdoor.com

https://www.batticdoor.com

Request More Info

DOWNLOADS

Related Products

Overview


The Battic Door E-Z Hatch Attic Access Door

Fits into a 22 ½” x 30 ½” Rough Opening

2 STYLES: STANDARD OR DELUXE (INCLUDES KEYED LOCK)

R-42, R-50 AND R-80 VERSIONS NOW AVAILABLE!

Attic Access Solutions For The New Energy Codes

E-Z Hatch is available now in R-42 (Zones 1-5), R-50 (Zones 6-8 and Canada) and R-80 (Super Insulated for Passive House Design).

E-Z Hatch Attic Access Door provides an air-tight attic entry. Easy to install in new or renovation. Fits into a 22 ½” x 30 ½” rough opening.

The E-Z Hatch Attic Access Door is an air-tight, high-performance, energy-efficient attic access scuttle door. It is R-42, R-50 or R-80, triple-gasketed, pre-finished, and fits in a 22 ½” x 30 ½” rough opening. It is an energy efficient alternative to energy wasting attic pull down ladders, and exceeds all Code requirements. Deluxe version is provided with 4-point lock and handles, keyed alike or different. It is less expensive solution and a higher performance alternative to a pull down ladder and the Code required insulated and gasketed stair cover. Exceeds all IRC, IECC, Energy Star, etc. Code Requirements. Meets the LEED Energy & Atmosphere Credits 3.1 (Minimal Envelope Leakage), and Exceeds the LEED Energy & Atmosphere Credit for Enhanced Insulation. Easy to install in new or existing construction.

A Message From Mark Tyrol, President of Battic Door:

Due to the recent IRC and IECC Code changes it may be difficult for Architects, Builders, Contractors, Remodelers, etc. to select an attic access solution for residential use that meets the new Building and Energy Codes:

2009 IECC Section 402.2.3 and 2009 IRC Section N1102.2.3 and 2012 IECC Section R402.2.4 reads: "Access hatches and doors. Access doors from conditioned spaces to unconditioned spaces (e.g., attics and crawl spaces) shall be weatherstripped and insulated to a level equivalent to the insulation on the surrounding surfaces." Energy Star Version 3 requirements conform with the 2009, 2012 IECC and 2009, 2012 IRC. The 2012 International Green Construction Code conforms to the 2012 IECC.

These Code requirements mean the attic access pull down ladder or access hatch must now be insulated to the same level as the rest of the attic (minimum R-30).

The E-Z Hatch is your attic access solution that meets these new Codes. It is a high performance attic access hatch that is an alternative to energy wasting pull down ladders. It provides an air-sealed attic access that helps to increase your blower door test results.

It is important to note that R-5, R-10 attic ladders Do Not Meet Code - they must be insulated to minimum of R-30.

E-Z Hatch attic access doors are provided with non-compressible insulation and comply with Guidelines prepared by the U.S. Department of Energy's (DOE) Weatherization Assistance Program (WAP) and the National Renewable Energy Laboratory (NREL) for use in Energy Efficiency Programs.

If your project includes pull down attic stair ladders please see our Battic Door R-50 Attic Stair Cover kits. Thank you.


See More


Sweetsstakes