Aquamax Solid Plastic Lockers
Solid Plastic Lockers are perfect for use in wet environments such as showers, pools and the outdoors.
Aquamax Solid Plastic Lockers are Ideal for applications where high humidity, moisture, and water are present. Plastic lockers are fabricated from solid high-density polyethylene panels (HDPE) for maximum strength and durability while providing corrosion resistance to most common chemicals.ADVANTAGES:
• Scratch ResistantFeatures:
• Corrosion Resistant
• Impact and dent resistant
• Easy to clean
• Mildew and odor resistant
• Graffiti resistant (pencil, pen, paint and most common markers)
• Chemical Resistant
Body/Frame: Knock-down, 24 gauge, High density (HDPE) Polyethylene plastic, 3/8” thick body panels
Doors: 1/2” thick solid HDPE plain doors with perimeter ventilation
Handle: Wardrobe doors have a projecting solid plastic lift handle. Box doors 18” and under include a single-point projecting padlock hasp with door pull
Latching: Full-height lift-type latching for single, double and triple tier wardrobe lockers
Hinges: Heavy-duty continuous full height extruded aluminum with a powder-coat finish to match color of door
Color: Stock Lockers are All Taupe or Taupe body with Blue doors.
Warranty: 20 YearKey Design Features of Aquamax Lockers
Mortise and Tenon construction provides superior strength with stainless steel fasteners to hold the locker together, no plastic welds or butt joints
Full overlay design of the locker, similar to a European design cabinet. “Look, no face frame”
No face frame allows for full entry into the locker.
Door sits away from the box of the locker creating “perimeter ventilation” the need for slots or vents in the door are eliminated as it creates 7 times the amount of ventilation than a typical metal locker. However, holes can be added to the locker door to create additional ventilation.
Ventilation holes are built into the locker box surfaces to allow air flow through the locker.
Hinge side panel leaf is connected to the entire length of the locker side panel. It is also trapped in place by the shelves, top and bottom of the locker.
Hinge wraps around the door which captures the door on three sides. The screws are tri-lobular which bite into the poly material. No need for inserts.
Hinge is made of 1/16” aluminum that is powder coated and has a 1/8” diameter stainless steel pin. The segments of the hinge are separated by two poly bearings that allow the hinge to swing smoothly.
Latching mechanism is a multi-point latching system. The latching bars are engaged into the locker side panel. The second is the hasp bar is attached to the side of the locker, not the back of the door. This creates TWO locking systems in one.
Doors will close without the need of having to lift the handle on the front of the door. Our doors can be pushed shut.
Adjustable mounting feet will allow the lockers to be installed on a base that can be fitted to the room. There is a 1 ½” of adjustment, from 4” to 5 ½”.
Lockers can be fitted with a sloped top, even after the installation is completed.
Lockers are modular which allows the room to be reconfigured. It also allows different combinations of lockers to be installed side by side.