1000 Series Top Of Ground Dock Lifts
These are Instant Docks that simply require positioning and plugging into a power receptacle and they are ready to go to work. These hydraulic lifts were designed for use with light equipment such as hand carts, 4 wheel carts and pallet jacks. Inquire about our loading dock lift platforms today.
SPECIAL FEATURES
- All models are equipped with a hinged bridge equipped with a pull back chain.
- All models have an approach ramp, wheel chock.
- All of the electrical controllers are Underwriters Laboratories approved assemblies.
- Each unit is washed with phosphoric acid, fully primed and then finished with baked enamel.
- All cylinders are machine grade with clear plastic return lines.
- All pressure hoses are double wire braid with JIC fittings.
- Reservoirs are mild steel.
- These hydraulic loading dock lifts conform to all applicable ANSI codes
SPEEDS:
- 1045 & 1055 230V/ 1 or 3 phase = 10 FPM
- 1055 115V/1 phase = 8 FPM
MODEL 1045 & 1055:These models were primarily designed to handle carts and dollies. When the units are raised, the ramps become wheel chocks that prevent carts from rolling off of the platforms. The pull back chain on the hinged bridge allows the operator to pull the bridge back and secure it while the unit is being lowered, without stepping around the load. Wheel and dolly transport sets are standard on these units and allow the units to be moved on smooth concrete surfaces.
See More
See Less