RHG Ship Stair Access Galvanized

Acudor Galvanized Ship Stair Access Roof Hatches are designed to provide convenient, economical access to the roof of a building.

Double-skin construction (“in box type design”) with 1" Polyiso (R-6) insulation and a continuous EPDM foam weather/draft seal gasket that is attached to the inside of cover to provide a flush, tight fit. Designed to support a live load of 40lbs./sq. ft., the cover is 14 gauge galvanized steel with a 22 gauge galvanized steel inside liner.

14 gauge galvanized steel with 1" thick Polyiso (R-6) insulation with Fiberglass liner at curb exterior. Curb is 12" high, with 3.375" wide bottom flange and pre-drilled mounting holes.

Heavy duty galvanized steel pintle hinges with 3/8" SS pin

Gas spring operators allow cover to open and close with ease. Stainless Steel inside pull handle allows for easy control when closing cover.

Self latching, zinc plated outside T handle with stainless steel inside lock and lever assembly. Heavy duty detention lock with paracentric key. Unit also has inside and outside padlock provisions.

Material is prepared with an iron phosphate wash, followed by a rust inhibiting primer, and then a baked on polyester enamel paint.

Stainless Steel Hardware standard on all hatches

1" Polyiso (R-6) insulation standard on all hatches

EPDM foam weather/draft seal gaskets provides weather tight construction

Supports 40lbs./sq. ft. live load

See More

See Less