AVM Industries -AVM Aussie Skin 560G - Below Grade and Blind Side Waterproofing System

DOWNLOADS

Below Grade Waterproofing 2.0mm Thick- Blind-Side Waterproofing

The AVM Aussie Skin 560 is a Pre-Applied 2.0 mm thick Waterproofing, Methane and Shot Crete Approved Heavy Duty, Easy to Install


Category: below grade waterproofing and dampproofing | blind side waterproofing | membrane waterproofing...

MasterFormat: Dampproofing and Waterproofing | Sheet Waterproofing



AVM Industries
8245 Remmet Ave.
Canoga Park, CA 91304
Tel: (888) 414-1041

info@avmindustries.com

https://www.avmindustries.com

Find a rep/distributor

Request More Info

DOWNLOADS

Related Products

Overview


AVM Aussie Skin 560G - Below Grade and Blind Side Waterproofing System

Aussie Skin 560G

Below Grade Waterproofing 2.0mm Thick- Blind-Side Waterproofing

The AVM Aussie Skin 560 is a Pre-Applied 2.0 mm thick Waterproofing, Methane and Shot Crete Approved Heavy Duty, Easy to Install, Puncture Resistant HDPE Sheet Membrane with added technologies creating excellent adhesion between the membrane and wet Concrete or Shot-Crete. Once the Concrete or Shot-Crete is cured, the membrane will become fully bonded to the concrete surfaces eliminating any potential migration of water between itself and the concrete surfaces to which it is bonded.


See More


Specifications

System Components
Aussie Skin 560G

AVM System 560G

LARR Approved Methane

Aussie Skin 560G Detail Strip

2mm x 13.1”x 65.6” roll

Narrow roll used for detailing corners or small areas

Aussie Skin Double Sided Tape

4”x 33’ Roll (32/box)

Double sided tape

Aussie Skin 550G Sanded Tape

1.2mm x 4”x 65.6” roll

Narrow roll used for corners or small areas

Optional Components
Drain Board 6000/6020

4'x50' | 8’x50’

Provides protection and drainage management

Tie Back Cover 4″

Tie Back Cover 4"

Heavy Duty Plastic

Tie Back Cover 6″

Tie Back Cover 6"

Heavy Duty Plastic

Tie Back Cover 8″

Tie Back Cover 8"

Heavy Duty Plastic