AVECS™ -Advanced Vapor Emission Control Systems - PRO-CURE

DOWNLOADS

COMING SOON: AVECS PRO-CURE is a water-based spray on liquid designed to penetrate green concrete the day it is poured to eliminate the need to wet cure slabs per ACI recommendations and does not require removal as do curing compounds.


Category: concrete slab vapor barriers | floor vapor barriers | fluid-applied vapor barriers...

MasterFormat: Common Work Results for Concrete | Cast-In-Place Concrete | Concrete Finishing...



AVECS™
2224 Chesapeake Lane
Highlands Ranch, CO 80126
Tel: (800) 832-7658

info@avecs.build

https://avecs.build/

Find a rep/distributor

Request More Info

DOWNLOADS

Related Products

Overview


Advanced Vapor Emission Control Systems - PRO-CURE

COMING SOON - PRIMARY USE OF AVECS PRO-CURE IS A WATER BASED SPRAY ON LIQUID DESIGNED TO PENETRATE GREEN CONCRETE THE DAY IT IS POURED TO ELIMINATE THE NEED TO WET CURE SLABS PER ACI RECOMMENDATIONS AND DOES NOT REQUIRE REMOVAL AS DO CURING COMPOUNDS MOST OF WHICH ARE PARRAFIN OR PETROLEUM BASED AND CAN INHIBIT BOND. PRO-CURE ALSO HELPS RESIST PENETRATION OF ACIDS, OILS, GRAFFITI, ETC. GREAT FOR CONCRETE SLABS ON-GRADE, BELOW-GRADE, ELEVATED DECKS AND CERTAIN ROOF APPLICATIONS WHICH WOULD NORMALLY TURN INTO VAPOR AND POTENTIALLY CAUSE DELAMINATION OF FINISHES. AVECS PRO-CURE GIVES YOU ACCESS TO ALL TRADES (EXCEPT FLOORING INSTALLATION) ON THAT SLAB THE VERY NEXT DAY THUS ACCELERATING YOUR SCHEDULE. AVECS PRO-CURE SHOULD BE USED SOLELY AS THE METHOD OF CURING THE SLAB AND NOT WITH OTHER CURING AGENTS.

Benefits

  • APPLIED DAY OF POUR & ELIMINATES NEED TO WET CURE OR CURES REQUIRING REMOVAL
  • ESCALATES PROJECT SCHEDULE BY A MINIMUM OF 7 DAYS/NO BLANKETS NEEDED
  • ECONOMICAL…
  • .10 SF VERSUS WET CURE = .18SF PLUS DOWN TIME TO OTHER TRADES
  • .10 SF VERSUS CHEAP CURES THAT REQUIRE REMOVAL AND REPROFILING = .85-1.00SF
  • COMPATIBLE WITH ALL FLOORCOVERINGS, ADHESIVES, PATCHING MATERIAL
  • GC CAN SELF-PERFORM OR HAVE FLATWORK CREW APPLY (SPRAYS ON)
  • NOT SOLD THROUGH DISTRIBUTORS
  • ASTM C309 COMPLIANT (PART 6 FOR WATER RETENTION)
  • ENHANCES BOND
  • ENHANCES OVERALL FLOOR FINISH APPEARANCE (PENETRATES WITH NO RESIDUE)
  • EASY TO INSTALL VERSUS EPOXY BASED SYSTEMS/FRACTION OF THE TIME.
  • HELPS INHIBIT RUST AND CORROSION OF REBAR/PAN
  • ELIMINATES EFFLORESCENCE


See More


Sweetsstakes