ASSA ABLOY Access-controlled Revolving Door
Closely manage access with the ASSA ABLOY RD3A and RD4A access-controlled revolving doors.
The access-controlled revolving doors ASSA ABLOY RD3A, RD4A1, and RD4A2 are designed to handle the demands of restricted access in one direction. These doors are ideal for situations where the door needs to be open, but locked, or the door needs to be open without sacrificing climate control or increasing energy costs.
The access-controlled RD4A revolving door by ASSA ABLOY (previously Besam) creates an attractive yet highly secure entrance that controls access in two directions. An emergency break-away feature allows the door wings to swing open and create a clear evacuation path. By providing complete separation of the indoor and outdoor environments, this revolving door can help reduce noise as well heating and/or cooling costs.
An ASSA ABLOY Entrance Systems revolving door with access control is perfect as a main or staff entrance, or as an entrance to a restricted area, because it can be programmed to allow authorized access while preventing unauthorized passage in one or two directions.
By providing complete separation of the indoor and outdoor environments, these revolving doors can help reduce noise as well heating and/or cooling costs. They are available in a variety of sizes to handle a range of passage needs. All models can be ordered in several different configurations that can be combined to match virtually any building, and are designed to be placed directly on the finished floor surface with no special foundations required.
ASSA ABLOY RD3A1, RD4A1 and RD4A2 are fully compliant with EN 16005 safety standard.
A revolving door is “always open, always closed” meaning air exchange is minimal. Not only will your indoor climate be safeguarded against unwanted air infiltration for the comfort of your visitors and staff, you will also spend less on heating and cooling of your building.
ASSA ABLOY RD3A Access-controlled Revolving Door
- Product ID: RD3A / RD4A
- Power supply: 230 V, 50 Hz, mains fuse max 10 A,100-120 V, 50/60 Hz, mains fuse max 16 A
- Power consumption: 200 W /30 W resting
- Lighting LED: 5 W 30 W
- Internal height non-standard (2100 - 2600 mm)
- Fascia height non-standard (1200 - 250 mm)
- Powder-coated finish (RAL colours)
- Anodized, clear or bronze
- Stainless steel cladding