A prominent, heavy-duty framing system, providing a permanent application with a retro flair." />

ASI Visual Display Products -Trim Systems - Series 9300

DOWNLOADS

The bold and heavy-duty trim system

A prominent, heavy-duty framing system, providing a permanent application with a retro flair.


Category: building directories | bulletin board cabinets | directory...

MasterFormat: Information Specialties | Visual Display Units | Markerboards...



ASI Visual Display Products
2210 Dunwin Dr.
Mississauga, ON L5L 1C7
Tel: (833) 632-0878
Fax: (905) 607-6885

info@asi-visualdisplayproducts.com

https://asi-visualdisplayproducts.com/

Find a rep/distributor

Request More Info

DOWNLOADS

Related Products

Overview


Trim Systems - Series 9300

The bold and heavy-duty trim system

A prominent, heavy-duty framing system, providing a permanent application with a retro flair. With its 1-1/2″ wide face protruding 1/4″ off the finished writing surface, Series 9300 units are available in a variety of finishes.

Features:
  • Bold, Heavy-Duty Construction
  • 1-1/2″ Exposed Frame
Easi Install

All of our boards are available fully assembled but we also have a unique alternative. Using our innovative “Easi Install“ system, you can save on shipping, handling and installation. Mounting the tray directly to the wall first allows the installer the flexibility to anchor directly to the wall at 16" centers. Once up, the framed unit smiply drops in the tray and is fastened at the top either through the map rail or using simple L clips.

  • Boards lay flat for shipping and handling
  • Allows distributors to stock 3 different styles of boards (same board-3 optional trays)
  • Board is installed up to 10% faster
  • Stronger installation
  • No gluing required
  • Easier handling
Surface Options
  • Porcelain
  • Natural Cork
  • Fabric
  • Vinyl
  • Forbo®


See More


Specifications

Installation
  1. Fasten tray securely to wall (provided loose).
  2. Remove clips from perimeter of board.
  3. Locate studs-if applicable-and fasten clips through slot B into studs (wall).
  4. Note: larger boards may have 3 clips.

  1. Set board tray.
  1. Tap down clips to sit on top of board. Using screw removed in step 1, fasten clips to board through hole C.
  2. Note: screws are self drilling, use electric drill with Robertson #2 bit to install.