ASI Visual Display Products -Trim Systems - Series 9100

DOWNLOADS

Slim Trim

Our slim and durable framing system that’s available with a square or radius corner. The Series 9100 is available in 5 standard sizes and custom sizes.


Category: building directories | bulletin board cabinets | directory...

MasterFormat: Information Specialties | Visual Display Units | Markerboards...



ASI Visual Display Products
2210 Dunwin Dr.
Mississauga, ON L5L 1C7
Tel: (833) 632-0878
Fax: (905) 607-6885

info@asi-visualdisplayproducts.com

https://asi-visualdisplayproducts.com/

Find a rep/distributor

Request More Info

DOWNLOADS

Related Products

Overview


Trim Systems - Series 9100

Slim Trim

Our slim and durable framing system that’s available with a square or radius corner. The Series 9100 is available in 5 standard sizes and custom sizes.

Features:
  • Radius corner is available in clear anodized aluminum
  • Square corner is available in clear anodized aluminum
  • Sophisticated narrow face trim
  • 9/32″ exposed frame
Easi Install

All of our boards are available fully assembled but we also have a unique alternative. Using our innovative “Easi Install“ system, you can save on shipping, handling and installation. Mounting the tray directly to the wall first allows the installer the flexibility to anchor directly to the wall at 16" centers. Once up, the framed unit smiply drops in the tray and is fastened at the top either through the map rail or using simple L clips.

  • Boards lay flat for shipping and handling
  • Allows distributors to stock 3 different styles of boards (same board-3 optional trays)
  • Board is installed up to 10% faster
  • Stronger installation
  • No gluing required
  • Easier handling
Surface Options
  • Porcelain
  • Natural Cork
  • Fabric
  • Vinyl
  • Forbo®


See More


Specifications

Installation
  1. Fasten tray securely to wall (provided loose).
  2. Remove clips from perimeter of board.
  3. Locate studs-if applicable-and fasten clips through slot B into studs (wall).
  4. Note: larger boards may have 3 clips.

  1. Set board tray.
  1. Tap down clips to sit on top of board. Using screw removed in step 1, fasten clips to board through hole C.
  2. Note: screws are self drilling, use electric drill with Robertson #2 bit to install.