07 62 00 - Sheet Metal Flashing and Trim

Below you will find links to company and product information for manufacturers and suppliers listed in the Sheet Metal Flashing and Trim section of Sweets... more


108
7
Products
Results per page:

Metal-Era, Inc. - Perma-Tite System 200 Fascia Single-Ply Application, Crimp-On Version
Metal-Era, Inc. - Perma-Tite System 200 Fascia Single-Ply Application, Crimp-On Version
Description: Perma-Tite System 200 Fascia Single-Ply Application, Crimp-On Version Model: Perma-Tite System 200 Fascia Single-Ply Application, Crimp-On Version This Perma-Tite Fascia uses a crimping method for securement, for those installers who prefer a more traditional approach to edge flashing details. It...

Certainteed Commercial Roofing - Commercial Roofing FlintEDGE® Coping
Certainteed Commercial Roofing - Commercial Roofing FlintEDGE® Coping
Description: Commercial Roofing FlintEDGE® Coping Model: Commercial Roofing FlintEDGE® Coping FlintEDGE® Coping utilizes a metal chair which functions as both a gutter chair with it's raised ribs and as an internal splice plate in the same color and finish as the coping cap. Standard 20 gauge galvanized steel...

Petersen Aluminum Corporation - Flashing and Trim
Petersen Aluminum Corporation - Flashing and Trim
Description: Flashing and Trim Model: Flashing and Trim Petersen Aluminum maintains complete flashing fabrication capabilities in each of its plant locations to produce trim for our panel profiles. Fabrication capabilities include press-breaking, shearing, notching and welding. Each trim accessory is...

FAMCO - Cricket Flashing
FAMCO - Cricket Flashing
Description: Cricket Flashing Model: CF The FAMCO Snow Cricket Flashing CF is designed to split snow and prevent it from damaging pipes and other roof protrusions. The CF features a large flange for easy installation and leak protection. For use on small diameter PVC vent pipes. Quality constructed in 28...

Manufacturer: FAMCO

Category: commercial flashings | flashings | metal flashings...

MasterFormat: Sheet Metal Flashing and Trim | Flashing and Sheet Metal | Manufactured Counterflashing Systems


Johns Manville Roofing Systems - Edge Metal Systems
Johns Manville Roofing Systems - Edge Metal Systems
Description: Coping and fascia systems designed for fast snap-on assembly for use with single ply and bituminous roofing systems. They can be custom fabricated to fit exact requirements. Presto-Tite™ is specifically designed for maximum protection against wind uplift damage. All systems qualify for a JM Peak...

Siplast Roofing & Waterproofing - Roof Perimeter Metal Systems
Siplast Roofing & Waterproofing - Roof Perimeter Metal Systems
Description: Specifically engineered for use with Siplast Roof Systems, the multi-component Paraguard System is designed to be easy to install. The roof edge features a galvanized steel waterdam/cant that can be installed at the start of a Siplast membrane application, allowing phased construction of the...

Southern Aluminum Finishing Co., Perimeter Systems - Designer Series Cornices
Southern Aluminum Finishing Co., Perimeter Systems - Designer Series Cornices
Description: Designer Series Aluminum Cornices: (Formed & Extruded) Formed & Extruded Cornices... Designer Series Cornice trims & mouldings are available in both formed and extruded aluminum profiles. Formed cornices offer an economical solution for virtually unlimited designs. Extruded cornices offer a more...