Architectural Metal Roof
Systems
ATAS International, Inc. Corporate Headquarters:
Toll-Free: (800) 468-1441
Product Presentation ATAS International Inc. offers eleven distinct and stylish metal roofing systems that are applicable for both commercial and residential applications. ATAS’ product line includes: traditional standing seam panels (Dutch Seam, Monarch, PC Snap-On System, Field-Lok, and Standing Seam Shingle); simulated tiles including a Northern European tile (ScanRoof), a Spanish tile (Techo Tile), and a stone coated tile (Granutile), a simulated wood shake (Permashake), a diamond shaped shingle (CastleTop), and a dimensional shingle (ADVANTA). For detailed product specifications, please refer to the specific product profile, listed above in bold type, on this CD. Structural Systems The advantage of metal roofing is its strength and durability. Several of ATAS’ metal roof systems are structural in nature; therefore, they can be installed over open framing or purlins. The lightweight and high load bearing properties of the structural metal roof systems allow maximum spacing between trusses and/or reduction of roof truss dimensions. Selection Carrying an inventory of over six million pounds of prepainted coil stock, ATAS has a color to meet your design expectations. Twenty-seven (27) standard colors in a high performance, Kynar 500® or Hylar 5000® based, finish are backed by a twenty-year limited warranty. If a non-standard color is requested, it can be provided, subject to availability, order size and extended lead-time. ATAS also carries touch-up paint for each color. For detailed product specifications, please refer to the specific product profile, listed above in bold type, on this CD. Quality All ATAS systems have undergone extensive testing: wind uplift, fire rating, water and air filtration, and various local building code acceptances. Class A and B fire ratings are achieved depending on the substrate. ScanRoof, Monarch, Multi-Purpose and PC Systems have met and surpassed the rigid requirements of the UL580 test procedure to receive the UL90 rating for wind uplift. In this test, all aspects of the roof system are evaluated, from the roof deck or sub-purlins, anchor clips and fasteners, as well as the metal panel itself. Load tables are available upon request. Further, ATAS’ 11" Dutch Seam panel, MRD110, in .040 aluminum, has been accepted and approved by the U.S. Government Corps of Engineers Guidelines (CEGS 07416). Due to the wide variety of the panel systems and assemblies, it is not feasible to publish each individual report. ATAS’ support team will provide information on the compliance of these ratings to the method of construction on a particular project. The Engineer and/or Architect must verify that the roof design will meet the requirements for all local codes. Affiliations & Services To be able to provide information on a 24-hour basis, ATAS has developed a catalog by Fax program through Thomas Register. To access information, call 1-800-4-FAXCAT, follow the prompt, give the code number for the product of interest, and pertinent information is sent directly to the inquirer’s Fax machine. Additionally, you can access complete product information and detailed 3-part industry standard product specifications on line at www.atas.com ATAS International, Inc. is a member of the following organizations which promote the use of metal in construction: MRA - Metal Roofing Alliance
Kynar 500® is a registered trademark of Elf Atochem North America,
Inc.
|