ColorHard is a premeasured color concentrate specially formulated to mix with Consolideck® LS® to produce a ready-to-use color hardener that colors, hardens and densifies horizontal concrete in one easy step. Add 4-oz of Consolideck® ColorHard to one gallon of LS® to create a high-performance color hardener. When combined with Consolideck® LS®, ColorHard decorates, dustproofs and improves the abrasion resistance of concrete floors and exterior pavements.
High-speed burnish color-hardened surfaces to an attractive luster or treat them with the appropriate Consolideck® protective treatment for added luster, enhanced color, improved stain protection or protection from damage caused by de-icing salts.
Consolideck® ColorHard color concentrates are available in 21 vibrant hues which can be used alone or in combinations for an unlimited range of shades, tints and artistic effects. Most ColorHard colors are suitable for interior or exterior applications. See the Placement Chart on page 2 for details.
Supplied as a color concentrate, water-based, environmentally responsible ColorHard minimizes freight, handling, storage and container disposal costs.
- Water-based, environmentally responsible ColorHard saves time, reduces waste and eliminates hazards associated with corrosive acid stains or highly flammable solventreduced dyes
- Vibrant colors change gray or white concrete into abrasion-resistant, dust-proof, colorful, decorative concrete
- Great for any-age trowel-finished, ground or textured concrete
- May be used over integrally colored concrete, shake-on color hardeners, acid-stained concrete or concrete colored with solvent-reduced dyes
- VOC Compliant. Non-flammable. Non-toxic
- Non-corrosive. Low odor. Suitable for use in
- occupied spaces
- Will not peel or flake
- Contains no harmful acids. Will not etch concrete or corrode nearby metals. No need to neutralize
- Layer or blend prepared colors to create unlimited color and design variations
- Two coats increase color intensity and may partially mask surface imperfections
- Ideal for use alone or under any Consolideck® protective treatment
- Easy application with low-pressure spray and push broom or microfiber pad
- ColorHard floors require protective treatments. See "Sealing" section for details
- Consolideck® ColorHard is translucent. It may not hide or mask variations in the concrete
- Some colors are intended for interior use only. See Placement Chart, page 2
- Not for surfaces exposed to standing water
- Not for concrete floors polished higher than the equivalent of #200 grit resin bond diamonds. Use Consolideck® GemTone Stains for highly polished interior concrete floors
Consolideck® GemTone ColorCoat is a durable, industrial maintenance floor coating. This water-based, high-performance formulation produces a UV-stable, high-gloss, fast-drying finish. Available in 15 standard colors, GemTone ColorCoats are compatible with Consolideck® lithium silicate hardeners and densifiers and GemTone Stains. Use GemTone ColorCoat alone or to complement floors treated with GemTone Stains.
- Compatible with Consolideck® lithium silicate hardeners and densifiers
- Appropriate for application to concrete which is cured, cured and honed, cured and polished or cured and highly polished
- Durable under the toughest wear, traffic and maintenance-cleaning conditions
- Excellent abrasion resistance
- Suitable for application to any cementitious surface
- No primer necessary
- Easy brush or roller application
- Quick drying, UV-stable colors
- Non-flammable. Low odor
- Easy soap and water cleanup after application
- Available in 15 standard colors
Consolideck® GemTone Stain transforms dull grey concrete into decorative, low-maintenance finished concrete flooring. Apply penetrating GemTone Stains to concrete before hardening/densifying with Consolideck® LS®, then apply Consolideck® lsGuard® to enhance the color with a high-gloss protective finish.
This non-flammable, water-reducible formulation penetrates and colors cementitious surfaces without risk of etching the surface or corroding nearby architectural metals. Use GemTone Stains alone or in layers over grey, integrally colored, acid-stained or color-hardened concrete for an unlimited range of colors.
Complement translucent GemTone Stains with solid-color GemTone ColorCoats.
Available in 21 standard colors, GemTone Stains are liquid concentrates in pre-measured 12-oz bottles. Adding one bottle to one gallon of fresh water makes a vibrant concrete stain. Concentrated GemTone Stain minimizes freight, handling, storage and container disposal costs.
- Vibrant colors turn gray concrete into colorful decorative concrete
- Adds color & depth to diamond-polished concrete
- Enhances integrally colored, acid stained, color hardened or concrete colored with solvent-based dyes
- Ideal for use under Consolideck® lithium-silicate hardeners/densifiers
- VOC Compliant. Non-Flammable. Non-Toxic. Non-corrosive. Low Odor. Suitable for use in occupied spaces
- Contains no harmful acids. Will not etch polished concrete surfaces or corrode surrounding metals. No need to neutralize
- Easy application and fast drying lets color be added and blended
- Produces consistent gem-like color on any age concrete floor
- Penetrates deeper than acid stains or conventional color pigments. Will not peel or flake
- Standard colors may be intermixed to create an unlimited number of color variations
- Additional coats may be applied to improve color depth, uniformity and intensity
- GemTone Stain is translucent. Variations in the concrete before staining will still be noticeable after staining
- Not intended for exterior applications or surfaces exposed to intense ultraviolet light
- Not for use on surfaces exposed to standing water
PROSOCO, Inc.
3741 Greenway Circle
Lawrence, KS 66046-5441
Tel: (800) 255-4255
Fax: (800) 877-2700
E-mail: sales@prosoco.com
Web site: http://www.prosoco.com
|