ARDEX Engineered Cements
400 Ardex Park Drive
Aliquippa, PA 15001
Tel: (724) 203-5000
Fax: (724) 203-5001
E-mail: info@ardex.com
Web site: http://www.ardex.com

ARDEX CD™ and CD FINE Concrete Dressing
Driveway and Sidewalk Refinisher

DESCRIPTION
ARDEX CD Concrete Dressing is a surface treatment for re-dressing worn, spalled, indoor or outdoor concrete surfaces to provide a “new concrete” finish. ARDEX CD is easy to apply, hardens quickly, is freeze-thaw stable, and produces a surface finish that is suitable for foot and rubber tire traffic.

ARDEX CD mixes with water to a creamy, smooth, slurry consistency for application over existing concrete surfaces including sidewalks, patios, walkways, driveways, garage floors, pool decks and most vertical concrete surfaces. ARDEX CD is engineered with Portland cement and select high-performance polymers.  It readily bonds to concrete surfaces and can be applied by trowel, squeegee, or broom. Once applied, ARDEX CD can be broom textured before it sets for a reduced-slip surface.

Use ARDEX CD for application over the surface of existing concrete to produce a new wear layer, as well as to fill in small surface defects such as spalls, gouges, and cracks.  Use ARDEX CD to re-surface walkways, patios, pool decks, concrete stairs, and driveways. ARDEX CD can also be used to resurface vertical concrete surfaces.

ARDEX CD covers 2-1/3 - 3 sq. ft. per pound and ARDEX CD FINE covers 5-6 sq. ft. per pound. Recommended for residential and commercial use only, ARDEX CD is not intended for industrial uses such as loading docks, heavy manufacturing or areas with heavy truck traffic.

ARDEX A-300
Pourable Outdoor Concrete Topping

ARDEX A-300 is a pourable, no-troweling, cementitious topping for leveling and smoothing outdoor and indoor concrete above, on or below grade.

When mixed with water, it produces a pourable compound that is easily placed with a spreader and finished with a long-handled smoother. ARDEX A-300 hardens by hydration and evaporation, is weather and freeze/thaw stable, and does not crack or spall.  It can be walked on in 4 hours and driven on after 48 hours.

ARDEX A-300 can be installed from 1/4 ” to 1/2” neat, and up to 3/4” thickness with the addition of proper aggregate.

RANGE OF APPLICATION
Use ARDEX A-300 to level and smooth concrete patios, balconies, residential driveways, private garages, suburban walkways, and other concrete surfaces exposed to normal foot and rubber-wheeled traffic.

LIMITATIONS
Ardex A-300 is not a resurfacing material for highways, streets, areas exposed to continuous traffic, industrial applications or any commercial applications subject to hard or metal-wheeled traffic which would require a customized topping.  Do not use ARDEX A-300 around swimming pools and areas subject to standing water.  Do not install over asphalt.

TECHNICAL DATA
Mixing Ratio:
4-1/2 quarts of water per 55 lb. bag
Smaller batches: 1 part water per 4 parts powder p.b.v. Coverage: A 55 lb. bag covers approximately 25 sq. ft. at 1/4” thickness.
Flowing Time:
Approximately 10 minutes at 70°F
Initial Set:
ASTM C191: Approximately 45 minutes at 70°F
Final Set:
ASTM C191:
Approximately 90 minutes at 70°F
Compressive Strength:
ASTM C109/mod.:
3200 psi
Ambient Temperature Range for Installations:
50°F to 70°F
Shelf Life:
One year.
Packaging:
55 lb./25 kg bags
Storage:
Store in a cool, dry area. Do not expose bags to sun.

ARDEX TILT WALL PATCH
Interior/Exterior Finishing Compound for Tilt-up & Vertical Concrete Walls

ARDEX TILT WALL PATCH is a surface treatment for filling and smoothing interior and exterior vertical concrete surfaces prior to sealing or painting.  Use ARDEX TILT WALL PATCH to fill and smooth exterior surfaces such as tilt-up wall and pre-cast concrete panels, as well as any other vertical concrete or masonry surface.  ARDEX TILT WALL PATCH is easy to apply, hardens quickly without shrinking, and produces a smooth surface finish which is suitable for painting or sealing in as little as 15 minutes.

ARDEX TILT WALL PATCH mixes with water only to a creamy, smooth consistency for easy application over interior and exterior vertical concrete and masonry surfaces.  Engineered with Portland cement, ARDEX TILT WALL PATCH is tougher and more durable than traditional gypsum and latex patches.  ARDEX TILT WALL PATCH dries internally permitting the finish coat of paint or sealer to be applied as soon as the surface is hard. Less waiting time means the job is finished faster.

RANGE OF APPLICATION
Use ARDEX TILT WALL PATCH to fill in surface defects such as spalls, gouges, cracks, dents, chips, bug holes, honeycombs…any type, size or shape of surface defect that needs to be filled and smoothed before coating.  Use ARDEX TILT WALL PATCH for filling and smoothing interior or exterior vertical concrete walls, whether poured-in-place, tilt-up, pre-cast, or masonry block.

ARDEX TILT WALL PATCH is not intended for use in areas that may be exposed to permanent moisture such as in retaining walls.

ARDEX POLY-TOP
Polymer Concrete Patching Compound

ARDEX Poly-Top is a two-component, trowel-grade, polymer reinforced patching compound designed to repair both plain and structural concrete.

ARDEX Poly-Top hardens quickly, with early development of high compressive strengths, so the floor can resume full service faster.  ARDEX Poly-Top can be walked on after 2 hours and lightly driven on with pneumatic tires after 6-8 hours.

FEATURES

Installs from 1/4” to 1” and up to 2” with the addition of proper aggregate

TECHNICAL DATA
Coverage:
One 2-component unit covers approximately 20 sq. ft. at 1/4” thickness.
Working Time:
20 minutes at 70° F
Initial Set:
30 minutes at 70° F
Final Set:
60 minutes at 70° F
Compressive Strength, ASTM C109/mod:
500 psi after 2 hours
3100 psi after 48 hours
5500 psi after 28 days
Flexural Strength, ASTM C348:
1500 psi after 28 days
Mixing Ratio:
One 55 lb. bag powder (Part A) with one gallon liquid (Part B).
Smaller batches: 4-1/2 parts powder to 1 part liquid.