Brush seals greatly reduce the infiltration of light, air, wind, rain, snow and other elements into building structures and rooms. They help prevent heat loss and control the penetration of smoke and fumes. Brush weatherstripping also reduces or prevents invasion of pests around door openings.
Pemko offers a wide variety of brush weatherstrip products. The majority of our brush products meet the requirements of ANSI/BHMA 156.22-2003 for latching force and air infiltration. All Pemko brush seals consist of densely compressed nylon filaments encased in high quality extruded aluminum retainers. These products are ideally suited for hollow metal and wood door (door bottom sweep, jamb/header gasketing, and meeting stile) applications. Pemko’s brush weatherstripping products are also very effective when used on overhead doors, sectional doors, sliding doors, and automatic doors.
- All Pemko brush seals consist of densely compressed nylon filaments encased in high quality extruded aluminum retainers.
- The dense nylon filaments conform to the contours of varying surfaces, providing a superior seal. Nylon Brush products have an extremely low closing force.
- Brush remains flexible down to -40°F and has a melting point above 400°F.
- UV stabilized, dependable, long-lasting, cost-effective.
- Nylon brush insert is designated by a “NB” following the finish code.
- Soft brush insert is designated by an “SB” following the finish code.
- All brush seals are supplied with #6 x 5/8" stainless steel sheet metal screws.
- Punched with slotted holes for adjustment (except 35° angle types which are drilled with 1/8" hole).
- All clear anodized brush products are supplied with gray brush (available with black brush upon request). Other finishes supplied with black brush.
- Most products meet the requirements of ANSI/BHMA 156.22-2003 for latching force and air infiltration.
- Satin Nickel finish is now available on many brush weatherstrip products.
Can be installed as a door bottom sweep. The dense nylon filaments conform to the contours of every sealing surface, providing a superior seal with extremely low closing force. All products meet the requirements of ANSI/BHMA 156.22-2003 for latching force and air infiltration.
All products meet the requirements of ANSI/BHMA 156.22-2003 for latching force and air infiltration.
We mill our own oak products to ensure the highest quality available. Stain grade oak is a compliment to any door opening. Nylon brush conforms to many surfaces to make a superior seal.
Design permits use as a concealed seal for many applications. 90° Aluminum Retainers have slotted holes for easy adjustment. All clear anodized brush products are supplied with gray brush (available with black brush upon request). Other finishes supplied with black brush.
Door Bottom Sweeps are most commonly used on the exterior of outswing doors. Rain drip models are best for doors exposed to water conditions.
Pemko mortise retainers are the ultimate design for concealed weatherstrip needs. They can be used on doors, windows and more. All clear anodized brush products are supplied with gray brush (available with black brush upon request). Other finishes supplied with black brush. Offered with nylon brush or soft brush options.
All clear anodized brush products are supplied with gray brush (available with black brush upon request). Other finishes supplied with black brush.
Aluminum snap cover conceals mounting screws to provide a clean aesthetic appearance. Covers snap securely into place to deter vandalism. All clear anodized brush products are supplied with gray brush (available with black brush upon request). Other finishes supplied with black brush.
Designed to butt up against the blade stop or existing aluminum frame to create a new perimeter seal for the door. Aluminum snap cover conceals fasteners while adding extra security. The new 29366CNB is for use in retrofit applications.
Astragals and meeting stiles on double doors often present problems because of complex conditions and requirements. Pemko offers solutions ranging from simple and inexpensive to more detailed. Each job should be carefully studied as to the specific requirements when selecting the appropriate gasketing. Note that some astragals consist of two parts, one for each door, and should be ordered accordingly.
Astragals and meeting stiles with a fire label may be mounted on pairs of doors wherein the gap meets the requirements of NFPA 80, 2-3.1.7 “The clearance between...the meeting edges of doors swinging in pairs on the pull side shall be 1/8” ± 1/16” (3.18mm ± 1.59mm) for steel doors and shall not exceed 1/8” (3.18mm) for wood doors.” Many products meet the requirements of ANSI/BHMA 156.22-2003 for latching force and air infiltration.
All clear anodized brush products are supplied with gray brush (available with black brush upon request). Other finishes supplied with black brush.
Snap covering helps prevent vandalism and adds an attractive finished look by concealing the fasteners.
Pemko offers brush weatherstripping for automatic door bottoms. When ordering, please specify if the automatic door bottom is for a semi-mortise application so that shorter screws can be provided. All automatic door bottom brush products meet the requirements of ANSI/BHMA 156.22-2003 for latching force and air infiltration. Clear anodized brush products are supplied with gray brush (available with black brush upon request). Other finishes supplied with black brush.
Pemko Manufacturing Company
Sales & Manufacturing
5535 Distribution Drive
Memphis, TN 38118
P.O. Box 18966 (38181)
Tel: (901) 365-2160
Toll-Free: (800) 824-3018
Fax: (901) 365-1354
Toll-Free Fax: (800) 283-4050
E-mail: websales@pemko.com
Web site: http://www.pemko.com
Sales & Manufacturing
4226 Transport Street
Ventura, CA 93003
P.O. Box 3780 (93006)
Tel: (805) 642-2600
Toll-Free: (800) 283-9988
Fax: (805) 642-4109
Toll-Free Fax: (800) 283-4050
|