Aluminum Gutters, Downspouts and Scuppers

Architectural Products Co.
1290 Aviation Blvd., Ste. 200
P.O. Box 630
Hebron, KY 41048
Tel: (859) 689-2210
Toll-Free: (800) 837-1001
Fax: (859) 689-2215
E-Mail: info@archprod.com
Web site: http://www.archprod.com

ALUMINUM GUTTERS, DOWNSPOUTS AND SCUPPERS

MANUFACTURER
Architectural Products Company has been manufacturing aluminum gravel stops and copings for over 40 years. Supplying gravel stops and copings both nationally and internationally, we excel at custom and unusual shapes and finishes per the architect's specifications and drawings. As a job shop manufacturer, no job is too small or large. To receive detailed product information and/or color samples contact us by phone, fax or E-mail.

PRODUCT PRESENTATION
Custom Formed Aluminum Downspouts and Gutters are available made from 5005-H34 alloy aluminum. We manufacture our line of Heavy Extruded Aluminum Downspouts for high abuse areas. We offer fully welded Aluminum Scuppers. Our Gutters, Downspouts and Scuppers are all fully compatible with our Copings and Gravel Stops. They are available in the same colors for complete coordination.

If you need a custom profile, be sure to contact our Engineering Department for technical assistance with developing your designs.

Formed Aluminum Gutters
Description
Custom Formed aluminum gutters are made to fit the architect's specifications. All gutters are supplied with 6" concealed aluminum joint cover plates.

Uses
Custom Formed Aluminum Gutters are to be compatible with the architect's desired construction.

Guide Specification
The Formed Aluminum Gutter shall be as manufactured by Architectural Products Company. The Gutter shall be 5005-H34 alloy aluminum in 10'0" (305cm) lengths with 6" (15cm) concealed aluminum joint covers. All exposed aluminum shall have a __________ finish.

Formed Aluminum Downspouts
Description
Custom Formed Aluminum Downspouts are made to fit the architect's specifications.

Uses
Custom Formed Aluminum Downspouts are to be compatible with the architect's desired construction.

Guide Specification
The Formed Downspouts shall be as manufactured by Architectural Products Company. The downspouts shall be 5005-H34 alloy aluminum in 10'0" (305 cm) lengths. All exposed aluminum shall have a __________ finish.

Heavy Extruded Aluminum Downspouts
Description
Heavy Extruded Aluminum Downspouts are made for high abuse areas.

Uses
The Heavy Extruded Aluminum Downspouts are to be used where a 3" x 3", 3" x 4", 4" x 4", or 4" by 6" Extruded Downspout is required.

Guide Specification
The Heavy Extruded Aluminum Downspouts shall be as manufactured by Architectural Products Company. The Downspouts shall be 6063-T52 alloy aluminum in 10'0" (305cm) lengths. All exposed aluminum shall have a __________ finish.

Aluminum Scuppers
Description
Aluminum Scuppers are designed to provide a run off space for water. Both Spill-Out and Through Wall Scuppers are available to fit the architect's specifications.

Uses
The Spill-Out Scupper is designed as a primary water release for the roof. The Through Wall Scupper is designed as an overflow water release. Both scuppers are made to fit architect's desired construction.

Guide Specification
The Aluminum Scuppers shall be as manufactured by Architectural Products Company. The Scuppers shall be 5005-H34 alloy aluminum. All exposed aluminum shall have a __________ finish.

MATERIALS, FINISHES
For color chart, see the "Formed Aluminum Gravel Stops and Copings" profile.

The standard colors are available for all Architectural Products Company's formed and extruded aluminum products. Flat prefinished sheet in .032, .040, .050 aluminum or 24 gauge steel is also available in these colors.

The standard colors are available in a Fluoropolymer Kynar 500 Finish. Other colors are available with a longer lead-time. A smooth texture is standard, but stucco emboss is available upon request for formed or sheet products.

Anodized finishes in Clear, Light Bronze, Medium Bronze, Dark Bronze or Black are available.
Color variation can and should be expected with the anodized finishes. If color consistency is required, we recommend a Kynar Finish.

If you have a color or finish requirement that is not shown here, please contact us.

The reproduction of color chips is as accurate as electronic publishing will permit. Contact the manufacturer for an actual color sample before making a final selection of color and for absolute accuracy in color matching.

Warranty
A. Manufacturer's Standard Warranty: Materials shall be free of defects in material and workmanship for five years after shipment. If, after inspection the manufacturer agrees that materials supplied by them are defective, the manufacturer shall at their own option repair or replace them.

B. Optional Special Warranty: Manufacturer shall guarantee that a Coping or Gravel Stop System, when installed per manufacturer's instructions, will not blow off, leak, or cause membrane failure, even in wind conditions up to 110 mph, or the manufacturer shall replace or repair their materials.

Disclaimer
In presenting this information, we cannot claim to serve in any but an advisory capacity and can undertake no liability. All recommendations regarding the use of our products should be modified, if necessary, to conform with local conditions and materials employed. Architectural Products Company also reserves the right to amend or change any of the information contained herein, whether to reflect new information obtained, or as needed to conform to specific project, job or climate conditions.

AVAILABILITY, COST
All of Architectural Products Company's products are available both nationally and internationally. Please contact the factory for estimates and availability of products.