ThyCurb Equipment Mounting Supports ThyCurb Equipment Mounting Supports are factory fabricated sheet steel structural members designed for placement on all types of roof systems and at the same time accommodate every variety of roof mounted heating, ventilating and air conditioning equipment. These units have a high load-bearing capacity attained by a system of internal bulkheads welded into position at specific intervals along the length of the rails. A continuous wood nailer covered by a removable counterflashing provides for an effective method of attaching roofing felts and assuring a water-tight installation. Equipment Supports are fabricated in three basic styles designated for the following applications: TEMS-1 For insulated Roof Decks, has fully mitered 3 inch cant and variable step to match deck insulation thickness. Standard step dimension 1/2 inch minimum to 2 inch maximum. Step dimensions over 2 inches available as an option. TEMS-2 For Non-insulated Roof Decks, has fully mitered 3 inch cant. TEMS-3 For all Roof Decks. Standard Construction
Optional Features
Thybar Corp/ThyCurb Main Plant & Office Akron Plant & Office Dallas Plant & Office Louisville Plant & Office Reno Plant & Office |