RAILING FITTINGS

With over 50 years of architectural railing experience nationwide, a complete line of pipe railing fittings have been developed to meet various building, construction and architectural applications. Several types, styles and sizes of fittings are available for safety and functional use in buildings, plants, institution and outdoor facilities. Numerous styles, quality construction, prompt delivery and application assistance give you the most versatility in railing system design. Several finishes and variations are available for you specific requirements.

Flush Welding Tee, Elbows and Crosses – Our flush weld fittings are available in steel aluminum and stainless steel and are compatible with schedule 40 pipe. They are supplied in a mill finish however other finishes are available upon request. These fittings may be used with Wedge-Lock^™ connectors.

Socket Weld Pipe Fittings – These fittings are designed to fit over the pipe and are available in steel and aluminum. They are formed fitting with open seams, however welded seams are available. Socket weld fittings are supplied in a mill finish other finishes are available upon request. These fittings can be fabricated in your shop by welding pipe post complete with elbow, tees, crosses and flanges, or they can be completed in the field by slipping your top rail through the tee's, then placing your middle rails into the crosses and then welding.

Coped Drive-On Connectors – There is no more pipe coping or notching necessary, these fittings are simple to use and weld on. These money-saving connectors are used with pipe sections to form a railing system. They have a unique drive-on and weld design which eliminates pipe coping and saves time spent cutting and aligning These fittings are available in steel, aluminum, and stainless steel for use with 1-1/4", 1-1/2" and 2" nominal pipe. They are supplied with a mill finish.

Wedge-Lock^™ Welding Connectors – These fittings are available for steel, aluminum, and stainless steel for use with 3/4", 1", 1-1/4", 1-1/2" and 2" nominal pipe size schedule 10 and 40. They are also available for 1.00", 1.25", 1.50", 2.00" and 2.50 OD tubing, .065" and .120" walls. Wagner's original patented Wedge-Lock^™ connector simplifies alignment prior to welding. Wedge-Locks^™ will take more than 100 pounds of tensions and will save up to 50% on your shop and field welding and finishing costs.

Single and Double Lock Splice Locks and Single One Piece Splice Locks^™ – Our Splice Locks are available in steel, aluminum alloy 3003 and stainless steel type 304. One piece are only available in pre-galvanized steel. Splice-Locks are designed for the alignment of handrail sections and as expansion joints. They are most effective as a joint stiffener when used with 12" of a welded post or handrail bracket.

The screw hole is threaded into the connector and the Splice-Lock's prongs hold the piece together as a unit allowing for simple insertions into the pipe or tube. The set screw has a headless socket with a cup end.

Splice-Locks have a similar shear strength as standard pipe but are not to be used in post assemblies. Single Splice-Locks are for use as connectors or expansion joints. For maximum strength, use Double-Lock Splice-Locks.

Rings and U-Bends – Our rings are for use in railings, fencing and any ornamental fabrication that you desire. They are available in steel, aluminum and stainless steel.

For more information on our Railing Fittings call our sales department at 1-888-243-6914 or visit our web site at www.wagnercompanies.com.