Hohmann & Barnard, Inc.
30 Rasons Court
P.O. Box 5270
Hauppauge, NY 11788-0270
Telephone: (516) 234-0600
FAX: (516) 234-0683
Website: http://www.h-b.com/


TIES AND ANCHORS • POSITIONERS

# Spyra-Lox® Rebar Lap-Joint Tie

Features:
U.S. PAT. NO. 5,379,562

  • No tools. Eliminates cumbersome procedure of tying lap-jointed rebars together in reinforced walls.
  • Increases worker productivity.
  • Reduces lifting-height of block over rebars.
  • Flow-through design allows grout to uniformly encase rebars at overlap.
  • Correct installation procedure allows for systematic placement of rebars to accommodate varying overlap requirements. Contact H & B for installation information.
  • Available for 3/8 in., 1/2 in., 5/8 in. & 3/4 in. rebars.
  • Available Brite Basic or mill galvanized.

Call for new 4-page Catalog including installation method and details

#RB & #RB-Twin Rebar Positioners

  • Positions rebars in center of block
  • Simple Z-shape wire bridges cell of block while bends rest on shell.
  • Available for 6 in., 8 in. & 12 in. block.
  • Available mill galvanized or hot dip galvanized 9 gauge wire.
  • #RB-Twin has double loops to hold 4 rebars.

#"Slip-Set" Stabilizer

  • Bonds masonry walls and restrains lateral movements while allowing expansion and control joints to perform as designed.
  • Use Style 'H' to connect level horizontal mortar joints.
  • Use Style 'V' to connect intersecting walls or new walls to existing walls.
  • Available mill galvanized, hot dip galvanized or stainless steel.

#CWT – Corrugated Wall Tie

  • Mill galv./stainless steel.
  • Hot dip galv. available in 18 ga., 16 ga. or heavier.
  • Standard size is 7/8 in. wide x 7 in. long.
  • Available in #26, #24, #22, #20, #18 and #16 ga.
  • Furnished with nail holes for tying masonry to existing concrete.
  • Other widths, lengths and gauges available upon request.

For bonding masonry to masonry.

#MWT – Mesh Wall Tie

  • Hot dip galv. wire.
  • 1/2 in. square x 16 ga. or 19 ga. wire.
  • 1/4 in. square x 23 ga. wire.
  • Cut to any width or length required.
  • Also available in 100 ft. rolls, width to suit.
  • Stainless steel wire upon special request.
  • Conforms to ASTM A185.

For bonding intersecting masonry walls.

#301W – Column Web Tie #

  • Mill galv./hot dip galv./stainless steel.
  • 3/16 in. or 1/4 in. diameter x 12 in. long.
  • Standard widths:
    2 3/8 in. (for 4 in. block)
    4 in. (for 6 in. block)
    6 in. (for 8 in. block)
    10 in. (for 12 in. block)
    12 in. (for 14 in. block)

For use with #359 Weld-On Tie (anchoring masonry to structural column).

#302W – Column Web Tie

  • Same sizes and availability as #301W (see above).
  • 1 in. flat end for use with #359F Series Weld-On Straps (3/4 in. wide).