Hohmann & Barnard, Inc.
30 Rasons Court
P.O. Box 5270
Hauppauge, NY 11788-0270
Telephone: (516) 234-0600
FAX: (516) 234-0683
Website: http://www.h-b.com/

The DW-10-X anchor, while encompassing all of the outstanding features of the DW-10 and DW-10-HS additionally offers a new pronged-leg construction. These legs bridge the insulation and/or wallboard and abut the metal stud, giving positive, independent anchorage in the event of long-term deterioration of insulation or wallboard. The design staff of HOHMANN & BARNARD has determined that a pointed, pronged-leg design is the most efficient method of stabilizing the DW-10-X, while maintaining the integrity of the insulation. This design also prevents positive loads on the anchor from compressing the insulation. All of these features are accommodated without compromising the structural ability of the anchor.

DW-10-X can be ordered with legs to accommodate from 1/2 in. to 3 in. combination insulation / wallboard. When specifying or ordering the DW-10-X series, utilize the designation below. The proper designation is determined by the total thickness of the wallboard and/or insulation – for example 1/2 in. wallboard use DW-10-X (1/2) ... 1/2 in. wallboard with 1 in. insulation (total 1 1/2 in.) use DW-10-X (1 1/2 in.).

Now available for superior protection against air and moisture infiltration
TEXTROSEAL^™

• Self-sealing. Seals around shaft of screw and legs of DW-10-X at the moment of penetration.
• Dual-Barrier Membrane. 40 mil thick multi-ply polyethylene/polymer modified asphalt.
• Ease of Installation. Adhesive-backed rolls 2 1/2 in. x 50 ft.
• Durable. Resilient, will not crack or rot.

Tested in conformance with ASTM D412, ASTM E96.