EP-ELECTRONIC PRESENTATION
This screen contains the basic descriptive information for Safe-T-Metal Thresholds. Open the "Safe-T-Metal Co., Inc." Showcase presentation at this time to review further information on non-slip abrasive surface castings, Safe-T-Metal nosings, treads and integral tread/risers.

PP-PRODUCT PRESENTATION
Safe-T-Metal Thresholds are manufactured in many styles to suit a wide range of project requirements. All thresholds shown in this presentation are available in aluminum, bronze, nickel bronze and iron, with surfaces available in plain, V-grooved (fluted) or cross-hatched textures. The ends can be square or cut-out to fit jambs, and widths are determined by project conditions.

Thresholds With Flat Bottom
1. Style F - square sides (plain shown)
Uses - floor plate, platform, expansion joint trench cover
2. Style FB - one side beveled (V-grooved shown)
Uses - floor plate, special threshold
3. Style L -both sides rounded (hatched shown)
Uses - nosing insert on steel grating, floor plate, special threshold
4. Style T1 - both sides beveled (V-grooved shown)
Uses - thresholds usually 3/8 inch high

Thresholds With Recessed Bottom
(V-grooved shown)
1. Style BB - square sides
Uses - thresholds usually 1/2 inch high
2. Style T1R - both sides beveled
Uses - thresholds usually 1/2 inch high
3. Style AXAX - both sides rounded
Uses - for interior doors (width and height to suit conditions)
4. Style FBR - one side beveled
Uses - for interior doors with special requirements

Offset Thresholds With Recessed Bottom
1. Style OS20 - offset (V-grooved shown)
Uses - thresholds usually 7/8 inch high
2. Style OS10 Special - offset (V-grooved shown)
Uses - thresholds usually 7/8 inch high
3. Style OS - offset (plain shown)
Uses - for exterior doors (width and height to suit conditions)
4. Style OS Special - offset (plain shown)
Uses - for exterior doors with special requirements

In the wearing surface of every Safe-T-Metal casting, the abrasive grains of tough, electric-furnace Corundum are embedded uniformly at the time of casting. These grains, by chilling the molten metal, increase the wearing qualities of the metal itself. Thus, Safe-T-Metal castings combine these attributes: permanent roughness of the anti-slip surface...extreme durability of both the grain and the metal...increased resistance to corrosion and the elements.

A variety of additional products are shown in the current Sweet’s Catalog File, product classification 05723/SAF. Please contact our technical sales office for further assistance in addressing your project requirements.
 
Thresholds
Product Classification: 08730

Safe-T-Metal Company, Inc.
P.O. Box 1182 (mailing)
Syracuse, NY 13208
1841 Lemoyne Avenue (shipping)
Syracuse, NY 13201
Tel: (315) 454-3252
Fax: (315) 454-3253
E-mail: dlapaglia@safetmetal.com
Web site: http://www.safetmetal.com