DUR-A-GARD OPF EPOXY COATING
APPLICATION METHOD Mix 1 part hardener (A) to 2 parts resin (B) for 3 minutes. Spread uniformly with a notched squeegee or a medium nap paint roller. Use a paint brush in tight places. A non-skid effect can be obtained by sprinkling super hard Non-Skid Grit onto applied epoxy as applicator proceeds with application. See DUR-A-GARD Application Instruction Sheet for complete instructions. SPREAD RATES DUR-A-GARD OPF can be applied up to 5 to 7 mils per coat. Spread rates depend on surface profile, (fairly smooth or rough), application technique and desired durability. Obviously, thick coatings are more appropriate for heavy traffic areas. DUR-A-GARD OPF is commonly applied at 250 to 300 sq. ft. per gallon, yielding 5 to 7 mils DFT. COLORS All Standard and custom colors are available. (see color chart at screen 5) PHYSICAL PROPERTIES See Table CHEMICAL RESISTANCE See Table CAUTION DUR-A-GARD contains epoxy hardeners and resins that may irritate sensitive skin and irritate or harm eyes. Avoid prolonged contact. KEEP OUT OF REACH OF CHILDREN. Before using any Dur-A-Flex, Inc. product, be sure the Material Safety Data Sheet is read and understood.
Dur-A-Flex, Inc. |