Trim-Tex
Inc.
3700 W. Pratt Ave.
Lincolnwood, IL 60712
Toll-Free: (800) 874-2333
Fax: (800) 644-0216
E-mail: catalog@trim-tex.com
Technical & Sales Contact: John
Calderaro
johnc@trim-tex.com
Web site: www.trim-tex.com
BULLNOSE CORNER BEAD
Soften corners and add a contemporary
look with Bullnose Corner Bead. Trim-Tex offers the most complete line
of 3/4" & 1-1/2" bullnose products in the industry.
BULLNOSE ARCHWAY CORNER BEAD
Archway Bullnose is notched to conform
to archways and other curved forms. It can go from a 15" inside radius
to a 20" outside radius.
OUTSIDE SPLAYED BULLNOSE CORNER
BEAD
Striving to offer you the most complete
line of bullnose products, Trim-Tex offers Outside Splayed Bullnose Corner
Bead. This bullnose was designed to fit off-angle outside corners referred
to as either 45º or 135º corners.
INSIDE SPLAYED BULLNOSE CORNER
BEAD
For finishing your inside off-angle
corners, Trim-Tex offers Inside Splayed Bullnose Corner Bead.
BULLNOSE INSIDE CORNER BEAD
Bullnose Inside Corner Bead is designed
to round a 90º inside corner. For easy finishing see tip below.
BULLNOSE KERFED BEAD
Bullnose Kerfed Bead has a 5/16"
leg which can be inserted into the channel of many pre-formed door and
window jambs to create an attractive rounded encasement.
BULLNOSE KERFED ARCHWAY BEAD
Bullnose Kerfed Archway Bead has
the same features as our Bullnose Kerfed Bead. Additionally, it is slotted
to conform to most any arched opening from a 15" inside radius to a 20"
outside radius.
BULL-RAIL
Bull-Rail is a decorative trim designed
to be applied to the surface of the drywall. Can be used horizontally,
vertically, or at any angle to create a bullnose accent. Pefect for breaking
up unexciting drywall runs. The finished Bull-Rail is 1" across and extends
out 1/2".
3/4" R. BULLNOSE J ROUND
Available in the two most popular
sizes, J Round is designed to be installed after the drywall. There is
no need to wrap the bead behind the drywall. It's great for finishing window
and door openings and for finishing drywall buildouts.
BULLNOSE MITER MARKER
Create perfect inside corners with
the Bullnose Miter Marker. This high quality tool includes miter marking
for 90º and 135º off angle inside corners, as well as alignment
marks that eliminate the guesswork when finishing door and window openings.
Each tool comes complete with full color usage instructions and works with
all 3/4" Bullnose products, including Bullnose Corner Bead, Bullnose Super
& Giant L Beads and Bullnose Fast Cap.
3/4" R. BULLNOSE SPLICER
The Bullnose Splicer is designed
to join 2 sections of 3/4" R. Bullnose Corner Bead. Also works when joining
straight and Archway Bullnose. Uniquely engineered spring action allows
the Splicer to be snapped into the bead, allowing you to align the two
Bullnose Beads perfectly.
3/4" R. BULLNOSE CLEANING TOOL
The Bullnose Cleaning Tool is designed
to clean compound from the Trim-Tex 3/4" R. Bullnose Outside Corner &
3/4" R. Outside Splayed Bullnose Corner. One quick & efficient tool
minimizes sanding on the radius of the bead. Made of long lasting polypropylene,
the tool radius actually improves with use.
Tool Maintenance: Light sanding
on leading edge as radius deepens.