Masonry Wall
Moisture Control and Weep Systems
No. 365 Trash Mortar Diverter: The Trash Mortar Diverter™ creates a trash mortar collector and acts as a moisture and air flow control system. It stops and collects trash mortar and holds it away from the face brick and the back-up walls. The V-Shape funnels moisture toward the center of the cavity, away from the back side of the face brick and the face of the back-up wall, then downward through three rows of holes to a weep system. No. 366 Cavity Vent Weep System:
For Brick Veneer. The Cavity Vent Weep System creates many openings at
the lowest point of the cavity or core of the wall, continuously along
the wall.
No. 330 Plastic Weephole:
3/8" dia. (9.5 mm) clear plastic tube [1/4" (6.3 mm) i.d.] clear plastic
tube, 4" (102 mm) long or cut to specified length.
Regular 3/8" wide x 2-1/2" high x
3-3/8" long
Heckmann Building Products Inc.
|
No. 85 Cell Vent:
In stall in the bottom vertical mortar joint of a brick wall. Cell Vents
consist of many small adjacent passageways. The cellular composition provides
easy drainage for moisture along the full height of the head joint.