Metal Roofing Englert Series 2000

Englert, Inc.
1200 Amboy Avenue
P.O. Box 149
Perth Amboy, NJ 08861
Tel: (732) 826-8614
Fax: (732) 826-8865
Email: englert.inc@prodigy.net
Web site: http://www.englertinc.net

PRODUCT PRESENTATION
Englert Series 2000 1-3/4" High Structural Snap Lock Standing Seam is a variable width (12" - 18") integral panel design, with optional pencil ribs. The variable width feature allows you to specify whatever width works with your design parameters and exterior aesthetics (12", 15", 16" & 18" or any infinite width between 12" - 18").

The panel design secures the male interlock hem into the female leg continuously, lending structural characteristics when applied over purlins (Cees or Zees). The panel is secured to the purlins or substrate by clips allowing for unrestricted thermal movement. The clip design provides 1/4" ventilation clearance between the flat surface of the panel and the substrate. All fasteners are concealed. Optional sealant ensures greater watertightness. Installation is fast and simple. No labor intensive mechanical seaming. Just secure the male leg with clips and snap the panels in place.

Englert Series 2000 Structural Snap Lock Standing Seam Panel System can be easily adapted for snap-on-batten applications. With Englert Series 2000 Snap Lock Standing Seam Profile, a 2" high x 1-1/2" wide continuous batten can simply be snapped in place giving it the snap-on batten look.

MATERIALS & FINISHES
24 ga. Galvalume conforming to ASTM A-792, AZ-55, 50 KSI yield point or 22 ga. Galvalume, 50 KSI or .032" and .040" aluminum alloy 3105-H14, or equal with baked on PermaColor 2000 in Kynar 500®/Hylar 5000® in all standard colors or PermaMetallic 2000 metallic coatings in a smooth finish. (See manufacturer for Color Card and Coating & Finish Processes.)

FLASHING & FLAT STOCK
All exposed flashing to be field formed in the same gauge, finish, color and texture as the panels. Protective strippable film should be removed at the time of the installation.

USES & APPLICATIONS
As an integrated roofing system, Englert Series 2000 1-3/4" High Structural Snap Lock Panels require a pitch of 3"/12" or greater (check with manufacturer for other slopes). Panels may be installed over purlins or solid deck with 2 layers of 15# felt. Englert Series 2000 panels may also be installed over metal deck and rigid insulation, with 1 layer of 30# felt, using clips and bearing plates without any purlins. Do not install panels directly over chemically treated wood.

Extended use of the Englert Series 2000 Panel System can be made for mansard/equipment screen applications over subgirts or as fascia and siding/wall system.

Panels should be continuous from ridge to eave and with no end laps. Horizontal purlins, 2 x 4’s or plywood and other decking under the panel system should be true, plumb and straight. Any deflection may cause panels to oil can. Such oil canning is not a cause for product refusal.

UL-90 RATINGS
Englert Series 2000 Structural Snap Lock System (12" - 18" wide panels) meets UL-90 rating in 24 and 22 ga. when applied over 16 gauge purlins, 4' o.c., with UL-90 clips.

Englert Series 2000 Structural Snap Lock System (12" - 18" wide panels) meets UL-90 rating in 24 and 22 ga. when applied over 22 ga. metal deck. Rigid insulation and a layer of 30# felt secured by bearing plates at 4' o.c. Clips fastened to the deck through the insulation. Horizontal purlins are not required. Check with Englert for details.

ASTM E-330-84: Englert Series 2000 Panel System meets the test criteria in accordance with pleated air bag testing (modified ASTM E-330) methods and the pertinent requirements of the South Florida Building Code 1988 Edition Section 2309.2 (a) Table 23-C for roofing applications. ASTM E-331-84 water penetration. ASTM E-283-84 air infiltration.

SPECIFICATIONS
NOTE TO SPECIFIER: Englert Series 2000 Panel System serves the structural needs of roofing/fascia, mansard, siding and soffit systems.

The Series 2000 may be specified for application over solid deck or over purlins or over metal deck with rigid insulation. The Series 2000 Panel System can also be secured with bearing plates and clips through the insulation to the metal deck. Minimum Pitch: 3"/12". Specify as required.

A. Panel System shall be the Englert Series 2000, 1-3/4" high, 18" wide, Structural Standing Seam Snap-Lock System (with pencil ribs, optional), with sealant applied at the panel interlock; specify "with battens" if you wish a batten appearance. The panels shall have baked on finish as specified in "Materials & Finishes," in manufacturer’s standard colors. Manufacturer shall offer a minimum of 23 standard colors from which to choose.

B. Substrate
- 24 gauge baked on finish over Galvalume ASTM A-792-83, AZ-55, 40 KSI yield point, 52 KSI tensile strength.
- * 22 gauge baked on finish over Galvalume per ASTM A-792-83, AZ-55, 40 KSI yield point, 52 KSI tensile strength.
- * .032" or .040" Aluminum Alloy 3105-H14 approved equal.
* NOTE TO SPECIFIER: 22 gauge steel and .032" and .040" aluminum are available subject to minimum order requirements. Call Englert for details.

C. Performance
1. Panel shall meet the requirements of Underwriters Laboratories, Inc. for Class 90 wind uplift resistance.
2. Air infiltration: No greater than 0.014 CFM/Ft² at a test pressure of 1.57 PSF and 0.009 CFM/Ft² at a test pressure of 6.24 PSF per ASTM E-283-73.
3. Water resistance: When tested for 5 gallons per minute spray for 15 minutes duration at each test pressure of 1.57 PSF, 6.24 PSF, 12.5 PSF and 15.1 PSF, there shall be no evidence of water penetration, per ASTM E-331-70.
4. Panel shall display a flame spread classification of a Class 1, when tested in accordance with ASTM E-84-87.
5. Panel shall be tested and conform to the requirements of the modified ASTM E-330 static pressure differential test.
6. Panel shall be tested and conform to the requirements of the Dade County Florida non-structural roofing system criteria; product approval number must be supplied for record.

Englert, Inc.
1200 Amboy Avenue
P.O. Box 149
Perth Amboy, NJ 08861
Tel: (732) 826-8614
Fax: (732) 826-8865
Email: englert.inc@prodigy.net
Web site: http://www.englertinc.net

Englert, Inc.

Colorado
Phone: (303) 288-8070

Connecticut
Phone: (203) 265-6704

Florida
Phone: (813) 248-2296

Massachusetts
Phone: (508) 774-0006

New Jersey
Phone: (732) 826-8610

New York
Phone: (516) 491-7700

Pennsylvania
Phone: (412) 461-1355

Tennessee
Phone: (423) 970-0090

Virginia
Phone:
(703) 922-9666
(757) 363-0622