Metal Roofing Englert Series 1000
Englert, Inc.
1200 Amboy Avenue
P.O. Box 149
Perth Amboy, NJ 08861
Tel: (732) 826-8614
Fax: (732) 826-8865
Email: englert.inc@prodigy.net
Web site: http://www.englertinc.net
PRODUCT PRESENTATION
Englert Series 1000 1-1/2" High Snap Lock is a variable width (12"
to 20") integral seam design with optional pencil ribs. The clip
design secures the panel system to the substrate and allows for thermal
movement. The clip design also provides 1/4" ventilation clearance
between the flat surface of the panel and the substrate. All fasteners are
concealed. Clips are spaced at 18" to 24" o.c. depending on
panel width.
Installation is fast and simple. Snap lock panel systems require no
mechanical seaming or separate snap-on seam cap. Panels can be
transitioned from roof to fascia by notching and bending the panels at the
turns and putting in knee caps with pop rivets.
MATERIALS & FINISHES
24 ga. Galvalume conforming to ASTM A-792, AZ-55, 50 KSI .032"
aluminum alloy 3105-H-14, or equal with baked on PermaColor 2000 in Kynar
500®/Hylar 5000®
in all standard colors or PermaMetallic 2000 metallic coatings in a smooth
finish. (See manufacturer for Color Card and Coating & Finish
Processes.)
FLASHING & FLAT STOCK
All exposed flashing to be field formed in the same gauge, finish, color
and texture as the panels. Protective strippable film should be removed at
the time of the installation.
USES & APPLICATIONS
As an integrated roofing system, Series 1000 1-1/2" high snap lock
panels must be installed on 3"/12" minimum slope over solid deck
(at least 1/2" thick plywood or 22 ga. metal deck) with a 2 layer
underlayment of 15# felt or 1 layer of 30# felt. Do not install panels
directly over chemically treated wood.
UL-90 RATINGS
Englert Series 1000 Snap Lock System (12" to 20" wide panels)
meets UL-90 rating in 24 ga. and 22 ga. when applied over solid plywood
deck with 2 layers of 15# felt or 1 layer of 30# felt, with clips at 18"
o.c. Check with manufacturer for more information.
Englert Series 1000 Panel Snap Lock System was tested for simulated water
spray equal to 8.8"/hour rainfall, with wind velocities ranging from
50 to 100 mph, with no leakage, damage or failures.
SPECIFICATIONS
NOTE TO SPECIFIER: Englert Series 1000 Panel System serves the
architectural needs of roofing/fascia and mansard systems.
Series 1000 Panel System may be specified for application over solid
deck, 5/8" plywood with 2 layers of 15# felt or 1 layer of 30# felt
or 22 gauge metal deck with 2 layers of 15# felt or 1 layer of 30# felt,
minimum pitch 3"/12" (specify as required).
A. Panel System should be Englert Series 1000, 1-1/2" x 16"
Architectural Snap-Lock Standing Seam System (with pencil ribs, optional).
The panels shall have baked on finish as specified in "Materials and
Finishes," in manufacturer’s standard colors. Manufacturer shall
offer a minimum of 23 standard colors from which to choose.
B. Substrate
- 24 gauge baked on finish over Galvalume ASTM A-792-83, AZ-55, 40
KSI yield point, 52 KSI tensile strength.
- 26 gauge baked on finish over Galvalume ASTM A-792-83, AZ-55, 40
KSI yield point, 52 KSI tensile strength.
- * .032" or .040" Aluminum Alloy 3105-H14 approved
equal.
* NOTE TO SPECIFIER: .032" and .040" aluminum
are available subject to minimum order requirements. Call Englert for
details.
C. Performance
1. Panel shall meet the requirements of Underwriters Laboratories, Inc.
for Class 90 wind uplift resistance.
2. Air infiltration/water penetration: No evidence of uncontrolled
leakage on Snap-Lock Seam at 100 mph with simulated water spray of 8.8"
of rainfall per hour.
3. Panel shall display a flame spread classification of a Class 1 when
tested in accordance with ASTM E-84-87.
Englert, Inc.
1200 Amboy Avenue
P.O. Box 149
Perth Amboy, NJ 08861
Tel: (732) 826-8614
Fax: (732) 826-8865
Email: englert.inc@prodigy.net
Web site: http://www.englertinc.net
Englert, Inc.
Colorado
Phone: (303) 288-8070
Connecticut
Phone: (203) 265-6704
Florida
Phone: (813) 248-2296
Massachusetts
Phone: (508) 774-0006
New Jersey
Phone: (732) 826-8610
New York
Phone: (516) 491-7700
Pennsylvania
Phone: (412) 461-1355
Tennessee
Phone: (423) 970-0090
Virginia
Phone:
(703) 922-9666
(757) 363-0622