Englert - 5" & 6" K-Style Gutter

Englert, Inc.
1200 Amboy Avenue
P.O. Box 149
Perth Amboy, NJ 08861
Tel: (732) 826-8614
Fax: (732) 826-8865
Email: englert.inc@prodigy.net
Web site: http://www.englertinc.net

PRODUCT PRESENTATION

Englert, Inc. has been a world leader in the manufacture and supply of standard K-Style 5" and 6" gutters and associated rainware for over 30 years. These products are designed and proven with hundreds of thousands of successful installations world wide. Englert gutters and components are produced with some of the highest quality standards in the industry today. Supported by a network of virtually hundreds of independent installers, Englert Gutter Systems are available almost anywhere in the world.

SPECIFICATIONS

A. Gutters shall be made of 3105-H24 aluminum and shall be continuous and seamless [Minimum tensile strength 26,000 psi, minimum yield strength 25,000 psi] or equivalent.

B. Gutter gauges shall be .032" or .027" (select one as needed) gauge nominal, with 3" x 4" or 2" x 3" (select one) downspouts, [leaders] in .019" gauge.

C. End caps to be .027" gauge.

D. Inside and outside miters to be .027" gauge.

E. Sealant/Caulking - (select as appropriate):

- Parabond Sealer - (silver).
- G.E. Silicone - (white, clear and bronze).
- Butyl Sealer - (white).

F. Downspouts anchors to be aluminum.

G. Gutter hangers to be .063" gauge.

H. Prior to painting, the metal shall receive a pre-treatment to assure for maximum paint adhesion. The exterior finish shall be CastleClad, two-coat system applied in a continuous baked-on process in a single operation, comprising of an acid-base primer and a baked-on high performance linear polyester topcoat. The inside of the gutter shall be finished with a polyester gold backer or wash coat.

I. All accessories used with the Raincarrying System shall have the same CastleClad finish as the gutters. The raincarrying Systems shall meet the following specifications and/or code approvals:

1. American Architectural Manufacturers Association (AAMA) Specifications 1405.1 "Specification for Aluminum Raincarrying Systems."
2. FHA Minimum Property Standard 4900.1 for One-and Two-Family Dwellings.
3. FHA Minimum Property Standard 4910.1 for Multi-Family Dwellings.

Englert, Inc.
1200 Amboy Avenue
P.O. Box 149
Perth Amboy, NJ 08861
Tel: (732) 826-8614
Fax: (732) 826-8865
Email: englert.inc@prodigy.net
Web site: http://www.englertinc.net

Englert, Inc.

Colorado
Phone: (303) 288-8070

Connecticut
Phone: (203) 265-6704

Florida
Phone: (813) 248-2296

Massachusetts
Phone: (508) 774-0006

New Jersey
Phone: (732) 826-8610

Pennsylvania
Phone: (412) 461-1355

Tennessee
Phone: (423) 970-0090

Virginia
Phone: (703) 922-9666
(757) 363-0622