Surface Preparation

Highly efficient materials are the basis of any installation

SGM 815 Self Leveling Underlayment
A cement based pourable self-leveling underlayment that can be used to smooth and level over concrete, wood, terrazzo and existing ceramic tiles.

Southcrete 60 Sound Control Underlayment
A scientifically designed underlayment, which muffles floor impact noises and reduces sound transmission through hard tile and hard floor surfaces.  Meets ASTM E989-89 and ASTM.  E492-90 with an IIC rating of 60 for Impact Insulation Class; and ASTM E90-90 with an STC rating of 60 for Sound Transmission Class.


Southcrete 1100 Crack Suppression & Waterproofing Kit
A two-part, trowelable, cementitious thin load-bearing waterproofing membrane system designed for use under thin-set and thick bed mortar installations.

SGM 833 Floor Mud
A factory blend of Portland Cement, graded silicas and additives, developed to produce a suitable dense substrate for ceramic tile and dimension stone.

SGM 821 Sill and Wall Mud-Light Weight Plaster Substrate
A factory blend of Portland Cement, sand and lightweight fillers.  Designed for use as a light weight plaster substrate bedding (brown coat).

Easy Float Floor and Wall Mix®
Ready to use, pre-mixed setting beds for ceramic tile and dimension stone.


Southcrete 1132
ONE PART LIQUID ANTI-FRACTURE & WATERPROOFING MEMBRANE

Southcrete 1132 is a single-component, water-based, brush or roller applied thin, load bearing liquid membrane. For use under thin set and thick bed mortar applications as a waterproof or anti-fracture membrane. The elastometric properties help reduce the risk of substrate cracks transferring above to the hard surface flooring. Southcrete 1132 is suitable for use under ceramic tile, dimension stone, vinyl tile, rubber tile, brick, parquet, and strip wood. Southcrete 1132 waterproof produces a continuous moisture barrier with outstanding adhesion to concrete slabs, concrete block, cured Portland cement mortar beds, cementitous tile backer board, and exterior grade plywood.

Conforms to: ANSI 118.10 – Load bearing, bonding, waterproof membranes for thin-set ceramic tile and dimension stone installation; ANSI 118.12 – Crack Isolation membranes for thin-set ceramic tile and dimension stone installation.