The CENTRIA SRS 2 Structural Standing Seam Roof System is a mechanically seamed standing seam roof featuring an integral batten. It can be roll-formed in the field for continuous long panel lengths and provides excellent weathertightness and an attractive appearance in a wide range of industrial, commercial, and architectural applications.
The CENTRIA SRS 3 Structural Standing Seam Roof System is a mechanically seamed roof system that features a separate, continuous batten. It can be field-formed for long panel lengths and is used in a wide range of architectural, industrial, and commercial roof applications.
CENTRIA's Curved SRS 3 Structural Standing Seam Roof System lets you add "curve appeal" to any project. Its striking lines, smooth and unbroken, let you explore dramatic roof designs that transcend the everyday. With its proven record of long-term performance, the SRS 3 system offers more than just the enhanced aesthetics of a standing seam roof -- it offers versatility, simplified installation, maximum weathertightness and improved life-cycle costs over competitive systems. Its 3" [76mm] standing seam creates a bold look while the separate, mechanically seamed batten provides exceptional resistance to weather and severe wind conditions.
- 2" [51mm] nominal height
- 12" [305mm], 16" [406mm], and 18" [457mm] panel widths available Field-formed continuous lengths up to 220' [67.1m]-0"
- Factory formed panel lengths to 48' [13.7m]-0"
- Standard planked pan; Optional pencil beads
- Integral, mechanically-seamed batten
- 20 [.91m], 22 [.76m], and 24 [.60m] gages available
- G90 Galvanized base material, optional Galvalume®*
- One-piece or two-piece attachment clips
- Minimum slope 1/2:12 [4.2%] without endlaps, 1:12 [8.3%] with endlaps
- UL 580 Class 90 Wind Uplift Rating; Tested in accordance with procedures established ASTM E 1592 M
- 3" [76mm] nominal height
- 12" [305mm], 16" [406mm], and 18" [457mm] panel widths available
- Factory-formed lengths available to 48' [13.7m] -0"; Field-formed continuous lengths available to 220' [67.1m] -0"
- Standard planked pan
- Separate continuous batten
- 20 [.91mm], 22 [.76mm], and 24 [.60mm] gages available
- G90 Galvanized base material, optional Galvalume®*
- One-piece or two-piece floating attachment clips
- Mechanically seamed
- Minimum slope 1/2:12 [4.2%] without endlaps, 1:12 [8.3%] with endlaps
- UL 580 Class 90 Wind Uplift Rating; Tested in accordance with procedures established ASTM E 1592
- FM 1-90 approval over open purlins or isoboard and deck
- Dade County Approval
- Clean, unbroken, symmetrical lines with concealed clips and continuous transitions
- Crimp-free curving process provides smooth sight lines
- Long panel lengths eliminate endlaps and improve weather resistance
- 16 [1.52mm] gage, two-piece clip and panel interlock design allows unimpeded thermal movement
- On-site mechanical seaming ensures weather resistance, enhances appearance
- 20 gage panels available for use in areas where wind loads may be extreme
- Walk-down curves available in 22 [.76mm]gage steel to a radius of 200' [60.96m] or greater
- Machine curves available in 22 [.76mm] and 20 [.91mm] gage galvanized or galvalume steel (Consult CENTRIA about other substrates and minimum radii)
- 12" [305mm], 16" [406mm] and 18" [457mm] widths
- Roof panel curving performed on-site or in the plant, using CENTRIA supplied equipment
- Available in CENTRIA's full range of colors
In-house architectural and structural design professionals are equipped to assist from project conception through completion. Assistance with design specifications, coating selection and engineering is available.
CENTRIA Architectural Systems
1005 Beaver Grade Road
Moon Township, PA 15108-2944
Tel: 412-299-8000
Toll-Free: 800-759-7474
Fax: 412-299-8317
Website: www.CENTRIA.com
|