MAPEI Corporation
1144 East Newport Center Drive
Deerfield Beach, FL 33442
Toll-Free: (800) 42-MAPEI
Fax: (954) 246-8800
E-mail: dmiller@mapei.com
Web site: http://www.mapei.com
Primers and Epoxies
Planibond™ EBA
Epoxy Bonding Agent and Primer
Planibond EBA (formerly Epo/Bond 30) is a two-component, multipurpose
epoxy bonding agent and primer. Planibond EBA is non-shrinking,
100% solids and insensitive to the effects of moisture. Planibond EBA
is used for a variety of applications, which include: Primer and bonding
agent for adhesion of fresh concrete, toppings, underlayments and screed
mortars to cured concrete and epoxy-primed steel; grout used to install
anchors, bolts, dowels, rods, steel bars and faceplates; epoxy repair mortar
(for interior use only) with the addition of select aggregates; structural
crack filler in gravity feed or injection applications; corrosion protection
and coating for steel reinforcing bars; structural adhesive for properly
prepared concrete, masonry, metal and wood surfaces. Planibond EBA meets
ASTM C-881 requirements.
Ultraprime™ WE
Water-Based Epoxy Primer
Ultraprime WE (formerly Epo/Prime) is a polymer-modified, solvent-free
water-based epoxy primer for enhanced adhesion to non-porous substrates
prior to the application of underlayments or topping materials. Ultraprime
WE is two-component and when mixed is purple in color for easy identification.
Ultraprime
WE improves adhesion over smooth, non-absorbent and difficult to bond
substrates such as ceramic tile, vinyl asbestos tile, vinyl composition
tile (VCT), cement or epoxy-based terrazzo, thin layers of old cutback
adhesive residue and properly prepared engineer-approved wooden sub-floors.
Ultraprime™ L
Acrylic Latex Primer for Concrete
Ultraprime L (formerly Novo/Prime) is a concentrated, solvent-free
acrylic primer used prior to the installation of underlayments, and topping
materials. Ultraprime L is green in color for easy identification.
Ultraprime
L improves the bond between a properly prepared and profiled concrete
substrate and MAPEI self-leveling underlayment or topping material.
Planibond™ E-Gel
Epoxy Primer, Crack Filler and Bonding Adhesive
Planibond E-Gel is a high-strength, two-component, thixotropic,
structural epoxy paste adhesive and binder designed to promote adhesion
to concrete, install anchors, fill cracks and used as a primer/binder for
epoxy concrete repair mortars. Planibond E-Gel is non-shrink, solvent-free
and moisture insensitive.
Planibond™ E-LV
Low Viscosity Epoxy Crack Filler, Bonding Adhesive and Coating
Planibond E-LV is a low viscosity injection resin and adhesive
designed to install anchors, fill cracks, to be used as an epoxy repair
mortar when mixed with oven-dried aggregates and to be used as a topical
surface coating.
Planibond™ 1C
One-Component Corrosion Inhibitor and Primer
Planibond 1C is a one-component system consisting of a water-based
polymer and corrosion inhibitor to be applied on reinforcing steel to prevent
corrosion before the placement of repair products.
Planibond™ 2C
Two-Component Corrosion Inhibitor and Bonding Agent
Planibond 2C is a two-component system used as a corrosion inhibitor
to be applied on reinforcing steel to prevent corrosion before the placement
of repair products and used as a slurry bond coat for mortars and concrete.
Planibond™ 3C
Three-Component Corrosion Inhibitor and Bonding Agent
Planibond 3C is a three-component system consisting of a solvent-free,
moisture-tolerant, epoxy-modified, corrosion inhibitor, designed as a cementitious
bonding agent and corrosion protection treatment. Use Planibond 3C
on all exposed reinforcing steel and as a bonding agent before the placement
of repair products.
|