![]()
HandNet software gives you networked access control that's easy to install,
simple to use, effortless to administer - and affordable.
- Monitors doors in real-time for multiple sites
- Allows remote site monitoring via modem or Ethernet
- Features the ability to control a door anywhere via direct communications
including RS485/422/Ethernet or modem
- With HandNet software you can network up to 120 HandKeys using a central
PC
Now you can have the security and convenience of biometric access control -
for the cost of a card-based system.
With HandKey® biometric readers and HandNet for Windows software, you'll
dramatically increase your security and eliminate time-wasting card administration.
With HandKey readers, your hand is your card. HandNet gives you networked access
control that's easy to install, simple to use, effortless to administer, and
affordable. You'll enjoy complete door monitoring in real time for multiple
sites. Remote sites can be monitored via modem or Ethernet. Every HandKey unit
has a built-in door controller, so you can create an access control network
by simply attaching a PC. You pay only for the software--there's no additional
cost for networking up to 1000 doors.
HandNet software gives you centralized access control. The system typically
runs "online," providing real-time, comprehensive door activity monitoring,
remote door control, and alarms. If the computer goes off-line for any reason,
the networked doors continue to operate without interruption. HandNet's user-friendly
interface runs on Windows 95/98/NT. Extensive use of wizards makes setup and
system maintenance effortless.
Tens of thousands of HandKey Systems are used every day in applications worldwide,
ranging from health clubs and computer rooms to laboratories and stock rooms.
Reliability and ease of use have established Recognition Systems as the acknowledged
global leader in biometric access control.
• Complete door access and monitoring
• Automatic hand template management
• Real time monitoring or audit trail mode
• Easy setup and administration
When new users are enrolled in the system, they can be assigned access to specific
readers with definable time zones through an unlimited number of access profiles.
HandNet 2.0 also has a start and end date for access, so temporary users like
consultants or guests can be granted access for a few days, weeks or months.
The system then automatically disables access rights at the end of the term.
Users can be reactivated in the software so there is no need to re-enroll.
Many installations use an enrollment reader to input new users in the system.
The new Remote Enrollment feature enables a reader to be controlled from the
software. So a guard behind a glass partition or a supervisor in a distant office
can enroll new users without physically going to the HandKey.
The new import/export feature enables sharing of user information among different
HandNet installations.
For example, the security officer in New York can send a users record to the
office in Taipei. The office in Taipei can then add the user to their system,
setting their own access restriction. When the user arrives he will be in the
system and there is no need to enroll.
Hard-wired communications operate via RS422, using up to 38 serial ports. Dial-up
modem and Ethernet connections are also supported.
Add, remove and track users from a central PC. Up to 25 user-definable text
fields may be specified for each user, in addition to standard fields such as
name, ID number, access profile, authority level, and rejection threshold. The
user window helps you keep track of people by displaying the last reader used,
with date and time of use.
Enroll users at any HandKey in the system. Hand template data from the enrolling
HandKey is automatically backed up on the PC and distributed to selected doors
in the system, as specified. Dial-up remote modem locations are also updated
automatically when a new user enrolls.
HandNet provides complete door management. Among the conditions that can be
monitored in real time are: door forced open, door open too long, duress, and
multiple auxiliary input and output conditions. Authorized operators may override
the lock condition at any door.
HandNet can run in the background while other tasks are performed on the PC.
When an alarm condition occurs, the user is notified immediately. If only an
audit trail is required, the PC need not be always turned on, because each HandKey
can buffer over 3,000 transactions.
HandNet allows you to dial up multiple remote sites automatically, following
a user-definable schedule. Assigning a name to each reader and site allows instant
identification of the location of each HandKey.
HandNet provides complete access control by user ID, time, and location. The
access profile wizard makes it easy to restrict time and location. HandNet supports
60 definable time zones, with four start and stop intervals per zone. An unlimited
number of access profiles can be defined. The holiday table can maintain an
unlimited number of entries.
Automatic transaction archiving minimizes maintenance headaches. You can define
the archiving process based on file size, days elapsed, or the day of the month.
Activity reports can be defined and saved, showing only the data you need. The
data source can be either current transactions or archived data.
HandNet lets you define filtered activity screens that display only activities
for the sites, readers, or users you specify. Each of these screens are easily
accessible through a tabbed display system. A predefined alarm activity screen
makes alarm acknowledgment as simple as a couple of clicks of the mouse.
- Computer: Pentium 233Mhz or higher (133Mhz Minimum)
- Memory: 32 MB (16MB Minimum)
- Drives: CD-Rom for installation; floppy or tape drive recommended for backup
- Hard Disk: 50MB Minimum; 10 MB Free Space Required
- Monitor: SVGA color, 1024 X 768; recommended 800 X 600 Minimum
- Operating System: Microsoft Windows 95 / 98 / NT, (HandNet for Windows
is tested to work with the English Version of Windows® 95, 98, NT. Recogniton
Systems, Inc. does not warrant and/or support this product with a Non-English
Version of Windows®)
- Communications: RS-422 (DC-101), dial-up modem, Ethernet
- Note: RS-485 2-wire configuration cannot be used with HandNet for Windows
Recognition Systems, Inc.
1520 Dell Avenue
Campbell, CA 95008
Tel: (408) 341-4100
Toll-Free: (800) 700-7447
Fax: (408) 370-4101
E-mail: trade_marketing@irco.com
Web site: http://www.handreader.com
|