CertainTeed Corporation Vinyl Siding and Trim 750 E. Swedesford Road PO Box 860 Valley Forge, PA 19482 Toll-Free: (800) 233-8990 Fax: (610) 341-7940 E-mail: building.solutions@saint-gobain.com Web site: http://www.certainteed.com Sweets 07460 BuyLine 2154 
CertainTeed Restoration Millwork™ General Description: CertainTeed Restoration Millwork is used as non-load bearing exterior trim. It can be installed in such areas as cornerboards, soffits, fascias, column wraps, door pilasters, frieze boards, non-load bearing rake boards, architectural millwork, door trim, and window trim. It is suitable for residential and light commercial applications. 
Finishes: Restoration Millwork comes in Natural White and does not require painting for protection. Painting is possible with 100% acrylic latex paint with an LRV (light reflective value) of 55 or higher. Please refer to the Installation Guidelines for complete details. Surface Patterns: Smooth/Smooth and Woodgrain TrueTexture™/Smooth 
Trimboard and Sheet Sizes: Restoration Millwork Trimboards are available in nominal widths of 4 inches to 12 inches and nominal thicknesses of 1-1/2, 1, 5/8, and 5/4 inches. Restoration Millwork Sheets are available in 4-foot widths and in lengths of 8, 10, 12, 18, and 20 feet, with actual thicknesses of 3/8, 1/2, 5/8, 3/4, 1 and 1-1/2 inches. Restoration Millwork Beadboards are 1/2-inch thick by 5-1/2 inches wide by 18 feet long. Restoration Millwork Corners are available with and without integral j-pocket in a nominal thickness of 5/4 inches and nominal 4-inch and 6-inch outside corner sizes. Lengths available are 10, and 20 feet, and vary by product
Specialty Profile Sizes: Provide the following Restoration Millwork Specialty profiles:
Composition: The product is a cellular PVC formulation. Fire Resistance Characteristics: Restoration Millwork products have a flame spread index (FSI) of less than 25 when tested in accordance with ASTM 84, which is a Class A (Class 1) Flame Spread Classification. Installation: Restoration Millwork products shall be installed in accordance with the manufacturer’s published installation instructions. Handle and store product according to CertainTeed recommendations. Methods: Complete installation recommendations are available from the manufacturer. Fasteners such as nails and screws shall be stainless steel or hot-dipped galvanized. Fasteners shall be approved box nails or finish wood screws and shall be designed for wood trim and wood siding with a thinner shank. Nails shall have blunt points and full-rounded heads. The fasteners shall be long enough to penetrate the solid wood substrate a minimum of 1-1/2 inches. The fasteners located at board ends shall be placed no more than 3/4 inches from the end of the board. 
Precautions: Restoration Millwork products are not for use in load-bearing applications, but may be used in spanned applications such as ceilings and soffits. Building Codes: Current data on building code requirements and product compliance may be obtained from CertainTeed. Installation must comply with the requirements of all applicable local, state and national code jurisdictions. Warranty: CertainTeed warrants to the original property owner/consumer that, when subject to normal and proper use, Restoration Millwork will be free from manufacturing defects for the 25-year period from date of installation. See Restoration Millwork Warranty RM005 for details and limitations. Technical Services: CertainTeed maintains an Architectural Services staff to assist building professionals with questions regarding CertainTeed products. Call 800-233-8990 for samples and answers to technical or installation questions. 
|