CertainTeed Corporation Vinyl Siding and Trim 750 E. Swedesford Road PO Box 860 Valley Forge, PA 19482 Toll-Free: (800) 233-8990 Fax: (610) 341-7940 E-mail: building.solutions@saint-gobain.com Web site: http://www.certainteed.com Sweets 07460 BuyLine 2154 
CertainTeed offers a versatile line of soffit designs. Whether you're looking for ventilated soffit to protect against moisture damage, extra-rigid soffit to span a wide porch ceiling, or vertical siding to add dramatic design effects, CertainTeed has the panel to do the job. CertainTeed vinyl soffit coordinates with CertainTeed 's complete line of siding, trim and accessories.
Composition: Soffit and vertical siding is produced using CertaVin™ custom-formulated PVC resin. This resin is produced exclusively by CertainTeed, allowing CertainTeed to maintain the high quality of its siding products. Product is in compliance with the ASTM Specifications for Rigid Polyvinyl Chloride (PVC) siding D 3679. Technical Data: Soffit and vertical siding meets the weathering standard in ASTM D 3679 using ASTM D 1435 procedure. As shown in Table 1, soffit and siding are in compliance with ASTM Fire and Smoke procedures and meets or exceeds International Building Code requirements. Table 1 ASTM E 84 Flame Spread Index 20, Fuel Contribution 0, Smoke Development Index 390 ASTM D 1929 Self-ignition temperature 813°F ASTM E 119 Fire Endurance Classification of 1 hour rated ASTM D 635 Material is self-extinguishing with no measurable extent of burn when tested in accordance with this specification. UBC 26-4 Multi-Story Flame Test - indicated CertainTeed vinyl siding does not contribute to the spread of fire in a multi-story situation. NFPA 268 Radiant Heat Test - Ignition Resistance of Exterior Walls - Conclusion that CertainTeed met the conditions for allowable use as specified in section 1406 of the International Building Code. Important Fire Safety Information: When rigid vinyl siding is exposed to significant heat or flame, the vinyl will soften, sag, melt or burn, and may thereby expose material underneath. Care must be exercised when selecting underlayment materials because many underlayment materials are made from organic materials that are combustible. You should ascertain the fire properties of underlayment materials prior to installation. All materials should be installed in accordance with local, state and federal Building Code and fire regulations. Documents: This product meets the requirements of one or more of the following specifications: For specific product evaluation/approval information, call 800-233-8990. Installation: Prior to commencing work, verify governing dimensions of building, examine, clean and repair, if necessary, any adjoining work on which the siding is in any way dependent for its proper installation. Sheathing materials must have an acceptable working surface. Siding, soffit and accessories shall be installed in accordance with the latest editions of CertainTeed installation manuals on siding and soffit. Installation manuals are available from CertainTeed and its distributors. Warranty: CertainTeed supports its soffit products with a Lifetime Limited Warranty including PermaColor Lifetime Fade Protection to the original homeowner. The warranty is transferable if the home is sold. Technical Services: CertainTeed maintains an Architectural Services staff to assist building professionals with questions regarding CertainTeed siding products. Call 800-233-8990 for samples and answers to technical or installation questions. Sample Short Form Specification: Product as shown on drawings or specified herein shall be Beaded soffits and vertical siding as manufactured by CertainTeed Corporation, Valley Forge, PA. The siding shall have a .039" nominal thickness. Installation shall be in accordance with manufacturer’s instructions. Three-part Format Specifications: Long form specifications in three-part format are available from CertainTeed by calling our Architectural Services Staff at 800-233-8990. These specifications are also available on our website at www.certainteed.com. © CertainTeed Corporation 5/07 
|